Mario Johnston
Well-Known Member
- Joined
- May 23, 2019
- Messages
- 621
I've been having a hard time painting a resin driver figure.
-Started with a light 220 grit sand then Tamiya model primer at room temp, allowed to dry between light coats. But dried tacky.
-Sanded down to resin again, tried same process with Rustoleum primer, no difference. Even tried to cure in a painters oven between coats.
Nothing is adhering to this thing, any help wouldn't be hugely appreciated!
-Started with a light 220 grit sand then Tamiya model primer at room temp, allowed to dry between light coats. But dried tacky.
-Sanded down to resin again, tried same process with Rustoleum primer, no difference. Even tried to cure in a painters oven between coats.
Nothing is adhering to this thing, any help wouldn't be hugely appreciated!