Search results

Bill What are your numbers? You can always just sign up with that number when you do your entry form. I would think that as long as no one else has them, you should be good. Just make a special note so I know what is going on. I could check with Cathie also. Later Mike

I will take the 440/3 for $25. Mike

Yeah gotta get the fin at least parallel with the boat. You might want to check to make sure it is not bent also. That 1/16 does not sound like a lot but it will put the fin out by .5 degree or so. This at speed with the prop walk will cause problems. I would go with a little toe in to start...

First there is no hydro that will turn left at high speed. So stop turning left. I don't remember anyone putting left turns out on the course anyway...... The back of the boat is being lifted and moved to the left everytime the prop goes around. You can shim the strut. You can also shim the turn...

Bill We have your beer stored in a warehouse building right next to the lake. There is a little storage fee that will need to be paid before you will be able to retrieve it. I think the going rate for storage of Corona is about $20 US per case. You need to look for a building with a large sign...

No such thing.........Well might as well be. They have not released this lastest design. They only thing they have on the market is the VS1. Mike

It will be no problem as long as it is larger than the stinger. Mike

Another benifit is 2 servos is when your tunnel blows off and goes in side ways, there will be a large side load on the motor causeing the plastic servos to strip or break teeth. This is not a problem with metal geared servos but you can still strip the horn. Mike

If you are seeing it all around the head button and not in the bowl area than you might have a negative head clearance. This would explain the reason the head is stuck in the sleeve. The piston has mushroom the head button ever so slightly causing it to get stuck. It may have been too tight to...

I mix 60%-60,20,20 66%-66,16.5,16.5 40%-40,40,20 Oil is the last digits. I run Klotz 80 synth/20 castor. Mike

I seem to recall 119. Mike

OK lets say the oil content is 20%. You have .2 gallon of oil, .2 gallon of nitro, .6 gallon of methanol all equalling to 1 gallon. So the ratio for 60% would be .2 gallon of oil, .6 gallon of nitro, .2 gallon of methanol equalling to 1 gallon. Methanol is your biggest volume so you will have to...

I don't think it really matters what your speed is when measured. What does matters is if it is an improvement over the last measurement you took. The only reason you would need the accurate reading is so that when your having a pissing contest with someone over speed, you will be right. Whippy...

I think the PRO has been in the process of building for a couple of years now. They originally had some for sale after MECOA bought the company from K&B. I think they built this from stock parts. I have not seen anyone getting one lately. If you want one, you will have to get it from someone...

Glenn Look at my signatutre below. I just added http:// in front of your web address and it came up as a link. Just edit it in your signature. Mike

No

I will take the 2 remote OS needles and Don F. bases for $25. Do you do payapl? If not, how would you like payment. Mike

JD was trying to say not available. Mike

I would rethink the mounting of the muffler. The lower unit cav plate is made from cheap cast aluminum. It will not hold up the the wieght of the muffler after you run it awhile. It will break. You need to reinforce it with some stainless steel. Mike

I work in the construction field. I am a commercial electrician. I fit rigid pipe for installs of electrical equipment all the time. The gas line is the same basic size other than it is black compared to my rigid conduit (using black pipe). I am confident there will be no issues. Just extending...