Recent content by Hayden Bright

I have made a lot of adjustments to my vs1 including the change from os to tt outboard, and I never seen any bouncing. This bouncing could suggest a couple of thing like the may be too much prop, you could also try to raise the engine see if it loosens up the hull some. Oh another idea try...

Love watching your videos ;) it's always a pleasure to see tunnels on song in good water and these visions are dialed in...

Two things I would play around with is your needle settings, go back to 3.5 turns out for a rich setting and retune, the TT seems to like a richer setting to be able make the power. Next I would be raising your motor because when your cornering the nose is setting down which is unloading the...

KND Valkyrie Boats :D There I said it so I must be smart :blink:

Dang these are some bad ass tunnels, lot of love in them brad, nice work mate..

OS engines recommend kerosene to flush out all the moisture B)

Another thing I had been thinking about is the scale speed we're asking these tiny boats to corner at. I would imagine a 3.5 tunnel would be closest to 1/10 scale and clocking 50 mph + speeds so that's a scale speed of 500 mph. Not to many full size boats cornering at 500 mph me thinks

Dp

Well I got the chance to run the TT powered vs1 up against Dave's .21 novarossi rigger recently, took both of us by surprise when the TT matched the nova powered rigger for speed down the straights and couldn't pull away at Any stage...Gotta be happy about them apples

Just out of curiosity how much steering end point travel is programmed In your setup. I fine you don't need much more than 50% to 60% steering servo travel and that's on a tight course.

I had this very issue with my OS outboard also running 100% synthetic at 22% oil and still lost the pinch very quickly... I know amains fuel here in oz is using a synthetic oil which acts like a castor and after using this fuel myself, I can say the residual oil coming from the pipe has a nice...

Stable boring...... Flighty and fassst fun, but seriously the cobra will do better in less than ideal conditions as you have already mentioned

Sheep .21 LOL ........ Tower hobbies has the lower's complete ready for you to bolt your powerhead on for around $160 Tony ;)

One thing I find that never really gets a mention with breaking in marine engines is to make sure you piston is at BDC while cooling between runs, I personally do this after every run but it's especially important during break in :)

If I could hit like I would Lol.... Very nice Murph would've been cool to see other boats right on your tail crossing your wake with that rear view action shoot.