GRoth265
Well-Known Member
- Joined
- Aug 12, 2004
- Messages
- 437
OK Chris Here's the set up thats been working very well. I have been working with Mark S. and the prop I'm very happy with a 1440 at 39.8mm with 2.57 cup. Set the boat on a flat board with the lower (bulge) for the shaft even with the top of the board. Set the angle at 0 degrees and run the boat. You may need to change the motor angle + or- 1/2 degree but no more. We have run this setup on the Lynx, nemisis,Jd wof and TS2 with good success. Use lead for the final trim when the boat want's to blow off. The OS is running on 60% nitro with no head shim and restricted water. When the OS (second stages you will know it) Try this you won't be sorry. By the way the boat may cavitate off the launch but hooks up after about 50 feet. Its common for the boat to bounce at lower speed but should lay down when you open it up and the motor ( stages) Greg. OK guy's tell me I'm full of it :lol: