Lehner Motors

[RaceMechaniX]

Guys,
I am a Lehner motor dealer here in the US and also the approved service station. I am placing an order soon and try spread the expensive shipping costs from Germany over several buyers so it's more palatable.
Shoot me a PM for a quote on any motor, cooling, couplers, connectors or other accessory you may need.

You can view their products here: Lehner Motor Technik Products
Some pictures of their hardware below.
-Tyler

 

[ALLAN YUEN]

I wonder that is series 1940 permit for P Ltd hydro? measure 36mmx 63mm Namba rule book less 60mm?

 

[RaceMechaniX]

No Allan, 63mm is not 60mm. I had Lehner build a special 1935 without fan to be legal for P-ltd. The motor is really too small power wise unless you are willing to be very aggressive on kv and run small props. This is not a good motor for P-ltd unless you want to SAW.

I would rather see you buy a TP3630 or Leopard 3660 which are both legal and 1/3 the price.

 

[Samuel Hagan JR]

What’s a good 40mm X 90mm on 6S

 

[RaceMechaniX]

Samuel,
Lehner has 36mm, 44mm and 60mm in inrunner 2-pole configurations and 52mm and 83mm in outrunner 10-pole configuration.
The closest motor to the 40x90 is a 2250 which measures 44x90 with the integral fan. You can choose between a 5-wind 2367kv for SAW down to a 10 wind with 1184kv.

The sweet spot tends to be around 1200-1300kv for 6s. There is a nice kv table here to see all the possible winds vs kv:Lehner Inrunner KV table

-Tyler

 

[RaceMechaniX]

Last call before I place the order.