Preston_Hall
Well-Known Member
- Joined
- Nov 4, 2003
- Messages
- 2,025
It seems the balancer thread has sparked some possible interest in the "jeweled balancer". I have been asked if I would make some. I will but I wood like to make a run of 10 units minimum.
As to the quality I will post some pics. Although I think I do a good job and my personal balancer shaft alignment is +/- 0.003" and I work as a partial machinist, I want it to be known that I have no machinist's certificates. I do think you could expect the same quality that I have produced 3 times now.
With that being said, what type of interest is there for a $80 balancer?
[SIZE=14pt]PLEASE READ THE FOLLOWING[/SIZE]
Jewel Bearing B-VJA-5
1/4" & 3/16" precision ground prop shafts are included. 1/8" available
Balancer
You can make yourself a nice little case as well. Case is not included.
Balancer in case
Case
Current order:
Carbonmann, shoboat (2) + 1/8" shaft, EatMyShortsRacing, Norm Doer, Clay Glover, izitbrokeyet?, Buddy Beaird, Joe W, Jeff Stubbers (2), jevmax, BigChuck, Mike Rappold, Tom v.d Brink, Jerry Wyss, Nigtmare, moron, Paul Pachmayer, circletrack, Lake S.P.O.R.T., jydracing, John Knight, david cox, Paul Stirton, chriscarbon, Don Ferrette, bOatnutz, Viper40,nova 21, Tony Grinter
[SIZE=14pt]I think I will cut it off at 30, currently 30. [/SIZE]
If you don't see your name then you need to make sure I put it there.
Payment due when I am finished. I will contact you.
I will ship anywhere. Depending on out-of-USA costs, you may see additional shipping charges. Don't get scared, I won't charge anything that it doesn't cost me.
At this time I am only going to make balancers. All other questions will have to wait. 2-3 weeks delivery may be compromised due to the increase in order quantity.
As to the quality I will post some pics. Although I think I do a good job and my personal balancer shaft alignment is +/- 0.003" and I work as a partial machinist, I want it to be known that I have no machinist's certificates. I do think you could expect the same quality that I have produced 3 times now.
With that being said, what type of interest is there for a $80 balancer?
[SIZE=14pt]PLEASE READ THE FOLLOWING[/SIZE]
Jewel Bearing B-VJA-5
1/4" & 3/16" precision ground prop shafts are included. 1/8" available
Balancer
You can make yourself a nice little case as well. Case is not included.
Balancer in case
Case
Current order:
Carbonmann, shoboat (2) + 1/8" shaft, EatMyShortsRacing, Norm Doer, Clay Glover, izitbrokeyet?, Buddy Beaird, Joe W, Jeff Stubbers (2), jevmax, BigChuck, Mike Rappold, Tom v.d Brink, Jerry Wyss, Nigtmare, moron, Paul Pachmayer, circletrack, Lake S.P.O.R.T., jydracing, John Knight, david cox, Paul Stirton, chriscarbon, Don Ferrette, bOatnutz, Viper40,nova 21, Tony Grinter
[SIZE=14pt]I think I will cut it off at 30, currently 30. [/SIZE]
If you don't see your name then you need to make sure I put it there.
Payment due when I am finished. I will contact you.
I will ship anywhere. Depending on out-of-USA costs, you may see additional shipping charges. Don't get scared, I won't charge anything that it doesn't cost me.
At this time I am only going to make balancers. All other questions will have to wait. 2-3 weeks delivery may be compromised due to the increase in order quantity.
Last edited by a moderator: