Throttle Linkage

[MOTOboat]

OK,

So Ive just about finshed rigging my first Nitro Tunnel and I'm hoping for some advise for the Throttle linkage.

I have a Servo in the Radio box (duh) with a wire inside teflon (Sullian 508) to a Clamp at the motor and a Quick Comnnect to the throttle arm.

I have it rigged so I can turn quite well right but much less turning left. I imagine this is OK as say ~35% left should be adaquate. However it just seems wrong.

Is there a trick I should be using to get the maximum turning capbility?

Not so bright

MOTOboat

 

[MarkScott]

The teflon tube should most likely be about 1/2" longer. This would give ample length for turning 100% both ways.

 

[MOTOboat]

The teflon tube should most likely be about 1/2" longer. This would give ample length for turning 100% both ways.

Figured as much, just didn't want to make another trip to the LHS. I'll have to leave work early tommorow..

THX

MOTOboat