The Evil Twin 90 SGX

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
New decks all cut out and laying out the carbon cloth with some west system.
Look Good "restore" upgrade more strong
default_wink.png
same paint as old ? different color?
Sorry Allan it's going to be house of colors florescent yellow and on each sponson will be the black and white Spy's. The transom will have Evil Twin and Spy VS Spy on the nose.
 
ABC" Cleaver" prop quick corner but fair straight pull bit of drag right shoulder
default_blink.png
if rigger will jump dive on rough wave water risk ! I pefer use Octura props so can change more cup
default_cool.png
Can you change ABC " Cleaver" adjustable cup??
default_ph34r.png
 
ABC" Cleaver" prop quick corner but fair straight pull bit of drag right shoulder
default_blink.png
if rigger will jump dive on rough wave water risk ! I pefer use Octura props so can change more cup
default_cool.png
Can you change ABC " Cleaver" adjustable cup??
default_ph34r.png
. Not so fast Alen you have to give the cleavers a lot more strut angle because they are not a lift prop . With out it if you watch closer it's pulling wheelies that's why I started to get in and out of the gass around the corners. My 90 single was doing the same 4 to 5 degrees and it should stick to the water and run super fast .IMG_0036.PNG
 
Last edited by a moderator:

Latest posts

Back
Top