Modifying a reg 3.5 for tuned pipe

Help Support intlwaters.com:

Chris doherty

Active Member
Joined
Sep 4, 2021
Messages
35
Has any one ever modified a standard k&b 3.5 lower to accept a tuned pipe like a ss or sx lower is cut for?
 

RobertDoak

Well-Known Member
Supporting Member
Joined
Sep 14, 2018
Messages
848
Yes...and very simple to do without any special tools...open the lower halves...and you will be able to see the area to be removed....i used a hack saw to cut relief lines then snapped them off and finished it with a file for the contour and final shape desired...bolt both halves back together and finish up...a dremel tool with a cutoff wheel does wonders also
 
Top