Dave Krienke
Member
- Joined
- Oct 26, 2008
- Messages
- 23
Had a hull come off ebay today and was crushed in the front from bad packing so im going to do some hull reworking here and was talking to jim irwin about how he had took the stumble blocks out and Cut from the front to the CG on the inside of each sponson at a 45 degree angle back to the cg and said it really worked . wondered if anyone has tried this or any other tricks to make this a good boat again?and pictures of anything you have would so help me also . thanks Dave
Last edited by a moderator: