RodneyPierce
Well-Known Member
- Joined
- Mar 26, 2006
- Messages
- 4,464
oky doky. Thanks.
Engine Balancing
- Thread starter Marty Davis
- Start date
-
- Tags
- engine balancing
Help Support Intlwaters:
jeff walker
Active Member
- Joined
- Feb 25, 2008
- Messages
- 38
What if you can get more weight off the crank than the bob weight? is this better or should you only match the bob weight? Thanks' all....................................jeff
Last edited by a moderator:
dwilfong
Well-Known Member
- Joined
- Jul 1, 2008
- Messages
- 5,968
Jeff the bob weight is the % of the rod ,pin .piston and needles. I settled with 52% of this weight to make my bob weight.
It is hard to get the balance perfect with the slugs. It will be a little off. I then started to take material off the crank after the slug where installed to get it perfect.
Not that 52% is perfect just What I decided to use after researching all the ways it has bin done.
It is hard to get the balance perfect with the slugs. It will be a little off. I then started to take material off the crank after the slug where installed to get it perfect.
Not that 52% is perfect just What I decided to use after researching all the ways it has bin done.
Last edited by a moderator:
Similar threads
