John Beardslee

Interesting, I have to BR2000 and read through the instructions of the 4000 to compare. In the advertising it mentions checking servos...

The manual is available on line at Futaba USA.

Chris, did you run it yesterday?

You can also buy spring loaded jeweled bearings if you want to do that style and adapt Tim’s design.

Marty Davis would know for sure as he bought the business from the Detroit guys and wether he, Joey or Greg made any design changes...

The sponsons are for sure early Crapshooter, it was the way Tim, Charlie and Dennis of Precision Boat ( Crapshooter) did the non-trip...

Those have been out of stock for a long time. Daniel has not had any of the small ones for quite awhile either. I bought some 500’s and...

Mark I used to make a single point tool for a mill (locked the head) and would broach out round holes to square using the quill feed...

One of the guys locally here got his 400 mm antennas from Walt Barney. 256-779-6472

His Dad and I were business partners, I developed the Bru-Line Antenna while in grad school and I marketed them under the Bru-Line name...

If you want the longer antennas ask for the 400 mm I think. (Grim can confirm) I probably have the Futaba p/n but it’s faster to call...

Tim, call Matt at Prop Shop Hobbies, he did stock them. John

Bruce, you have a pm. Thanks, John

Daniel, on these engines you have to work through the exhaust port to insert the wrist pin and the retaining clip. They are a bugger...

Tim, What’s the O.D. of the pin? SAE and International? McMaster Carr sells brass tubing in metric sizes John