2013 New Riggers, Let's see um!

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Back to front, Homemade .90 with K&B .91, JAE .45G with AA .45, JAE .45G with OS .45, and a JAE .21G with CMB .21.

001.jpg
 
Here's a pic of my new JAE Twin 45. Plan on having it's maiden voyage this Saturday - hope everything is properly finished.

Tom

CIMG8245.JPG
 
I'm not really a rigger person,,, but I inherited this from Bob Johnson when he left Florida, going to Tejas.

I finished it up, ran it a few times in the raw.

Then Bob made me a swap offer I coudn't pass up. So, I spiffed it up with a fresh coat of paint, unfortunatly pictures never really capture the full color of in person

The clear was applied with a good amount of gold, flop to blue pearl dust.

The red color is a mixture of quit a few colors.

But anyway, here's my contribution to riggers for 2013

Oh yeh,, I guess I should tell ya, it's a Pinkert Coyote Sprint 45,, the sponsons are molded epoxy, filled with foam and top capped with ply.

https://ricksrcstuff...ictures/243#243

Disregard the first photo of the rudder assy.
 
Last edited by a moderator:
I'm not really a rigger person,,, but I inherited this from Bob Johnson when he left Florida, going to Tejas.

I finished it up, ran it a few times in the raw.

Then Bob made me a swap offer I coudn't pass up. So, I spiffed it up with a fresh coat of paint, unfortunatly pictures never really capture the full color of in person

The clear was applied with a good amount of gold, flop to blue pearl dust.

The red color is a mixture of quit a few colors.

But anyway, here's my contribution to riggers for 2013

Oh yeh,, I guess I should tell ya, it's a Pinkert Coyote Sprint 45,, the sponsons are molded epoxy, filled with foam and top capped with ply.

https://ricksrcstuff...ictures/243#243

Disregard the first photo of the rudder assy.
Run that puppy, I can hear Chris now, inside lane 1, go go go. :D :lol:
 
here's my contribution to riggers for 2013Oh yeh,, I guess I should tell ya, it's a Pinkert Coyote Sprint 45,, the sponsons are molded epoxy, filled with foam and top capped with ply. Disregard the first photo of the rudder assy
man, that is a killer boat! It must be pretty fast?
This is really inspiring me to complete my (brand-new, original) Coyote .67/.80 kit, with original (brand-new 1988) ) Rossi R81 Marine engine.

Is that an Octura motor mount you're using there?
 
Last edited by a moderator:
here's my contribution to riggers for 2013Oh yeh,, I guess I should tell ya, it's a Pinkert Coyote Sprint 45,, the sponsons are molded epoxy, filled with foam and top capped with ply. Disregard the first photo of the rudder assy
man, that is a killer boat! It must be pretty fast?
This is really inspiring me to complete my (brand-new, original) Coyote .67/.80 kit, with original (brand-new 1988) ) Rossi R81 Marine engine.

Is that an Octura motor mount you're using there?
Never really got-er dialed in,,

Yes, it's an Octura Omni mount

David,

Don't know where your located,,, but if ya need help with paint, Let me know
 
Last edited by a moderator:
Back
Top