INTERNATIONAL WATERS Christmas Giveaway!!!!!!

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Everything is gone folks. Merry Christmas!!

I've got the following up for who ever needs it.

1. Mark Sholund prepped Octura 1450 prop. 3.21" TE cup, 2.81" COB Pitch, 47.79" diameter. Only been in the water twice. No dings. (taken)

2. Speedmaster 4" rudder extension with bearing block. Used on my gas boat for two seasons. Very good shape. (taken)

3. Walbro 257 Gas Carb. Stock and New. (taken)

4. Servo mount for standard sized servo. (taken)

Free shipping for everthing.

servo-mount-1_medium.jpg

SPDR-015.jpg
 
Last edited by a moderator:
I've got the following up for who ever needs it.

2. Speedmaster 4" rudder extension with bearing block. Used on my gas boat for two seasons. Very good shape.

Free shipping for everthing.
I already accepted a gift, however, if this isn't claimed I'd be very interested in this! :)

ALSO... I have two brand new standard size servo mounts that I will offer up. Gizmo Motors Mounts. One mount is missing two 2-56 bolts - but I think I can find some before I ship them out. Both mounts I'll ship to one person - postage paid...

photobucket-2879-1324513452056.jpg
 
I've got the following up for who ever needs it.

1. Mark Sholund prepped Octura 1450 prop. 3.21" TE cup, 2.81" COB Pitch, 47.79" diameter. Only been in the water twice. No dings. (taken)

2. Speedmaster 4" rudder extension with bearing block. Used on my gas boat for two seasons. Very good shape.

3. Walbro 257 Gas Carb. Stock and New.

4. Servo mount for standard sized servo. (taken)

Free shipping for everthing.
Would like to get #2 speedmaster 4" extension

How much for you to ship to Canada?

Thanks.

Thomas
 
Have (2) .12 Hydro flex shafts with drive-dogs. Both cut down to 11-5/16" from tip to front of drive dog. Will fit .12 JAE G2 if motor mounts are glued in according to instructions. (#1) is AquaCraft .150 X 11-5/16" to 3/16 stub shaft

to.150 small bore thread for smaller bore prop. (#2) is .150 X 11-5/16" to 3/16 stub shaft for larger bore props.

Both will be shipped together. $5.00 for shipping.

Merry Christmas.
I still have this if anyone is interested. I'll ship it for free in the C.US..
 
I've got the following up for who ever needs it.

2. Speedmaster 4" rudder extension with bearing block. Used on my gas boat for two seasons. Very good shape.

Free shipping for everthing.
I already accepted a gift, however, if this isn't claimed I'd be very interested in this! :)

ALSO... I have two brand new standard size servo mounts that I will offer up. Gizmo Motors Mounts. One mount is missing two 2-56 bolts - but I think I can find some before I ship them out. Both mounts I'll ship to one person - postage paid...

photobucket-2879-1324513452056.jpg
jay, looks like we're exchanging gifts :) . i'll take the servo mounts, i can use them in the wife's .40 crackerbox. i'll pm you my addy. no biggie on the screws, i have some.
 
Last edited by a moderator:
Okay how's about these......

1) Futaba BR-2000 battery checker

2) GreatPlanes Electrifly Triton EQ 1-6S balancing board - Flightpower, Thunder Power P/N GPMM3201

3) GreatPlanes Electrifly Triton EQ 1-6S balancing board - Hyperion, Polyquest P/N GPMM3202

Shipped free in the 48.
 
Buckshot...I'm in for #1.

Merry Christmas & happy New Year

Okay how's about these......

1) Futaba BR-2000 battery checker

2) GreatPlanes Electrifly Triton EQ 1-6S balancing board - Flightpower, Thunder Power P/N GPMM3201

3) GreatPlanes Electrifly Triton EQ 1-6S balancing board - Hyperion, Polyquest P/N GPMM3202

Shipped free in the 48.
 
Back
Top