Throttle Arm

[Glenn McClintic]

Hi all

I'm installing an Orlic carb on a Nova 46 wrap around. I need a pinch bolt style arm that is offset to get clear of he starting belt. Here's a photo - the distance from the carb barrel centerline to the linkage ball is about 0.6" and the offset needs to be about 0.4". Shaft size is 3/16".

Does anyone make something like his?

Thanks - Glenn

 

[John Knight]

Just to be clear for all of us, I assume that you are looking for the alum arm on the right, is that correct?

 

[FloridaScaleBoater]

He is looking for an aluminum arm that mounts like to one on the right (pinch screw)

But needs it to be offset like the OS arm on the left

 

[Robert Pickard]

John Abritton in Tampa makes them the only way i know of getting a hold of him is through Mic

 

[Glenn McClintic]

Thanks for the replies,

FloridaScaleBoater is correct that I need an arm that mounts with a pinch bolt but is offset like the black arm.

How would I get hold of John Abritton?

Thanks again

Glenn

 

[Robert Pickard]

Get a hold of HTV Boats on here Mic here has his number