Grimracer
Well-Known Member
- Joined
- Dec 27, 2001
- Messages
- 9,502
Just thought I would share some regarding the race.
The quality of driver, for the most part, was as good as i have seen at a race. VERY skilled group.
The water was OK for sport racing. It would have been nice to have better water but in the end it was OK water.
The site for the race was as nice as they get. The area around the course is large and there is lots of room to go long. (My second visit)
There were some VERY fast boats in the field.
Then to my race.. I had not put a boat in the water sense last August and as it goes, life got in the way. Plus Golf, Helicopters, and planes! LOL
I had NO IDEA I had a shot at US1 with my Sport 40. Typically i can feel a good contest coming but this one snuck up on me.
My boat is a 2010 Super Sport 45 (one with the newer bottom) hull by Phil Thomas. This boat is pure QUALITY. I have raced this boat sense 2011. The motor is a CMB RS that Steve Cooper did for me. Its been a good motor. The rudder is Speedmaster as well as the strut. The turn fin is my own. The motor is offset to the right to force the drive line out 1deg. I have 8oz of lead over the left sponson. (A strange setup but it works well) NOTE: this is not how Phil sets them up and its proly best to follow his instructions.
I have a MAC pipe set at 10" with an after muffler. (not sure who made it)
Round one and two were good.. then round 3 the boat slowed down.. finished the heat and brought the boat in.. blew the coupler..LOL.. whew.. dodged a bullet. Round 5 came and it was GAME ON.. Eric was pushing me VERY HARD.. managed a win and when the boat came in.. and the cowl came off chunks of stuffing tube were in the bottom of the boat.. I nuked the stuffing tube...LOL WHEW.. again.. this could have went ALL WRONG! lol
Thanks to all the VERY kind racers at this years Internats. It was a fun race and it was good to catch up with old buddys and make new ones.
8th in SAW
3rd in Oval
1st in Heat Racing
US1.. YEA!
ROCK ON!
Grimracer
The quality of driver, for the most part, was as good as i have seen at a race. VERY skilled group.
The water was OK for sport racing. It would have been nice to have better water but in the end it was OK water.
The site for the race was as nice as they get. The area around the course is large and there is lots of room to go long. (My second visit)
There were some VERY fast boats in the field.
Then to my race.. I had not put a boat in the water sense last August and as it goes, life got in the way. Plus Golf, Helicopters, and planes! LOL
I had NO IDEA I had a shot at US1 with my Sport 40. Typically i can feel a good contest coming but this one snuck up on me.
My boat is a 2010 Super Sport 45 (one with the newer bottom) hull by Phil Thomas. This boat is pure QUALITY. I have raced this boat sense 2011. The motor is a CMB RS that Steve Cooper did for me. Its been a good motor. The rudder is Speedmaster as well as the strut. The turn fin is my own. The motor is offset to the right to force the drive line out 1deg. I have 8oz of lead over the left sponson. (A strange setup but it works well) NOTE: this is not how Phil sets them up and its proly best to follow his instructions.
I have a MAC pipe set at 10" with an after muffler. (not sure who made it)
Round one and two were good.. then round 3 the boat slowed down.. finished the heat and brought the boat in.. blew the coupler..LOL.. whew.. dodged a bullet. Round 5 came and it was GAME ON.. Eric was pushing me VERY HARD.. managed a win and when the boat came in.. and the cowl came off chunks of stuffing tube were in the bottom of the boat.. I nuked the stuffing tube...LOL WHEW.. again.. this could have went ALL WRONG! lol
Thanks to all the VERY kind racers at this years Internats. It was a fun race and it was good to catch up with old buddys and make new ones.
8th in SAW
3rd in Oval
1st in Heat Racing
US1.. YEA!
ROCK ON!
Grimracer
Attachments
Last edited: