- Joined
- Jul 24, 2002
- Messages
- 7,135
These are square case EXR disk motors that came out just before the blue head drum EXR's.
All in very good shape, all have RPM rods and WIB bearings, one has a brass flywheel good for SAW. All disks ground flat and true to the bearing surface.
Exhaust flanges grooved - no headers needed.
Included:
2 - 12mm (.472) bore RPM carbs.
2 - new piston/sleeves, one cut to 188*
2 - new sleeves with new 30% Si billet pistons ready to fit.
1 - used RPM rod.
3 - new WIB bearings.
2 - new RPM rods.
1 - new crank.
2 - disks.
5 - new Turbo Heads (2 threaded for plug cooling caps).
3 - screw in plug caps.
Sorry, North America, PayPal only.
How 'bout $600 shipped?
Please reply to this thread only!
All in very good shape, all have RPM rods and WIB bearings, one has a brass flywheel good for SAW. All disks ground flat and true to the bearing surface.
Exhaust flanges grooved - no headers needed.
Included:
2 - 12mm (.472) bore RPM carbs.
2 - new piston/sleeves, one cut to 188*
2 - new sleeves with new 30% Si billet pistons ready to fit.
1 - used RPM rod.
3 - new WIB bearings.
2 - new RPM rods.
1 - new crank.
2 - disks.
5 - new Turbo Heads (2 threaded for plug cooling caps).
3 - screw in plug caps.
Sorry, North America, PayPal only.
How 'bout $600 shipped?
Please reply to this thread only!
Last edited by a moderator: