• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts Wanted Still looking for Picco 80 EXR parts and OPS 67 and 80 parts

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

James Woody

Well-Known Member
Supporting Member
Joined
Oct 11, 2023
Messages
77
My original thread has gone a little sideways so I will start another. I am looking for OPS 67 and 80 parts... mostly connecting rods with bushed ends and piston and sleeves. As far as the Picco 80 EXR, I would be interested in a new (or very good) complete engine and the same connecting rod, piston, sleeve, but am open to collections. I somehow missed the Picco collection that was up for sale earlier last week. That would have been perfect.
 
Ok got some photos . Both engines pistons and sleeves look virtually new . Engine #1 is the one with the carb. I can't believe what engine# 2 looks like
If it was ever started I would be surprised . Will.only sell as a pair . $450.00 for the pair plus shipping.
 

Attachments

  • 20231104_150435.jpg
    5.4 MB · Views: 0
  • 20231104_150405.jpg
    6.6 MB · Views: 0
  • 20231104_150227.jpg
    2.1 MB · Views: 0
  • 20231104_150220.jpg
    6.3 MB · Views: 0
  • 20231104_150217.jpg
    6.7 MB · Views: 0
  • 20231104_145813.jpg
    6.2 MB · Views: 0
  • 20231104_150217.jpg
    6.7 MB · Views: 0
  • 20231104_145813.jpg
    6.2 MB · Views: 0
  • 20231104_145502.jpg
    6.1 MB · Views: 0
  • 20231104_145447.jpg
    5.7 MB · Views: 1
Ok got some photos . Both engines pistons and sleeves look virtually new . Engine #1 is the one with the carb. I can't believe what engine# 2 looks like
If it was ever started I would be surprised . Will.only sell as a pair . $450.00 for the pair plus shipping.
Tom I will take them both. I will message you my address for a total with shipping. Thanks for the photos.
 
Its been a while since I posted this and It still applies. The boats I have all need a little work so I am still "rebuilding". I have also purchased what I believe is an older 45 sized Road Runner rigger so I as I get that one closer to being done I will be looking for a powerplant or 2 for it as well.

Woody
 
A local friend has a Picco P80 with a header he will sell. It needs new bearings and I can see a scratch/line on the piston but it has good compression. $185 shipped . I can post pictures if interested. If not it will be listed. Let me know Thanks
 
I have a good used rtr OPS 67 , and a bunch of good used parts that I'll sell.
I'll post pictures tonight if you're interested.
 
The engine is good to go, everything else has been run through my Ultrasonic cleaner.
I believe all parts are good with the exception of the one piston and Sleeve. The fit is shot but the piston and rod are good.

$250 for everything shipped!
 

Attachments

  • Screenshot_20240424_191202_Gallery.jpg
    Screenshot_20240424_191202_Gallery.jpg
    1.3 MB · Views: 0
  • Screenshot_20240424_191154_Gallery.jpg
    Screenshot_20240424_191154_Gallery.jpg
    1.5 MB · Views: 0
  • Screenshot_20240424_191146_Gallery.jpg
    Screenshot_20240424_191146_Gallery.jpg
    1.5 MB · Views: 0
  • Screenshot_20240424_191139_Gallery.jpg
    Screenshot_20240424_191139_Gallery.jpg
    1.4 MB · Views: 0
  • Screenshot_20240424_191130_Gallery.jpg
    Screenshot_20240424_191130_Gallery.jpg
    677 KB · Views: 0
  • Screenshot_20240424_191118_Gallery.jpg
    Screenshot_20240424_191118_Gallery.jpg
    855.4 KB · Views: 0
A local friend has a Picco P80 with a header he will sell. It needs new bearings and I can see a scratch/line on the piston but it has good compression. $185 shipped . I can post pictures if interested. If not it will be listed. Let me know Thanks
Thanks for the heads up Jeff but I am going to pass.
 
The engine is good to go, everything else has been run through my Ultrasonic cleaner.
I believe all parts are good with the exception of the one piston and Sleeve. The fit is shot but the piston and rod are good.

$250 for everything shipped!
Tim, I am interested in your offer but would like to think about it. I will let you know tomorrow after I get home if that's okay.
 
Forgot this pic, a couple rotors, pins and gaskets
 

Attachments

  • Screenshot_20240425_065018_Gallery.jpg
    Screenshot_20240425_065018_Gallery.jpg
    822.4 KB · Views: 0
Back
Top