Repeat offender hello

[Flemming Breil]

Hi guys,
After a while, trying to get back into the RC boat hobby! I was on this great forum 15 years ago or so. Learnt a lot at that point in time and MAN, have things changed in boats and tech.


Working now on a pristine Microbust mono that used to have a CMB .91 in it but it seized over the 15 years of neglect.
Will be looking for new tips by reading lots and looking for a motor and set-up tips.

Glad to be back!!

 

[Grimracer]

Welcome Back!

 

[dasboata]

Hi guys,
After a while, trying to get back into the RC boat hobby! I was on this great forum 15 years ago or so. Learnt a lot at that point in time and MAN, have things changed in boats and tech.


Working now on a pristine Microbust mono that used to have a CMB .91 in it but it seized over the 15 years of neglect.
Will be looking for new tips by reading lots and looking for a motor and set-up tips.

Glad to be back!!

so chances are that if you put the motor away good it still is,, unless it's in a moist environment,, the oil that is left in the nitro motors gum up the bearings and crank you might want to try to flush it out with WD and get it turning over by hand , them it needs to come apart for inspection , & bearings flush out pretty easy