Looking for 67 XXX Hardware for Pinkert Coyote Daytona Hydro

[kamijenna]

I am looking for some 67 size Gardner Hardware for my Pinkert Coyote Daytona Hydro.

If anyone knows of someone that has some let me know please. I am all so looking for a prop

for this boat I dont know what size to run with a 67 CMB Cam motor. If some one has any info

or has one of Dons Coyote Daytona Hydro let me know.

Thanks to all,

Brian

I'm not a Beginner Boater I have been Boating for over 20 Years.

 

[DON MAHER]

Give Lenny Blake at Rum Racing a call he has what you need. 1-480 423-9146

Don

 

[kamijenna]

CAN SOMEONE HELP ME WITH A PROP? WHAT SIZE TO RUN

& DOES ANYONE HAVE A PROP FOR THIS BOAT?

THANK YOU,

BRIAN

 

[ChrisCapaldi]

Hi Brian, I ran one of these boats quite a few years back. I believe I was running a X465 on it.

Chris

 

[kamijenna]

Bump

 

[John Knight]

H-38 is a great 67 prop. H-32 also but is smaller than the 38. H-29 is also a possibility and is smaller than the 32. Will depend on the hull, engine and pipe package. All are ABC's.

Octura 1667 is also an option but needs a strong package to run it.

All are 1/4" shaft props. I use only 1/4" shafts for my 67 and 90 engines, not the 1/4" cut down to 3/16 for the prop. There are few options for 3/16" props for the 67/80/90 size engines and hulls.