JAE .12 Build

[JSCARPINO]

Hello All

I ordered a JAE .12 Kit from Zip Kits.

I am going to put a OS MAX .18 TZ engine in it I had from my 1/10 scale truck racing days.

I know the Kit says .12 but I want to try it out anyway....LOL

I need to know what flywheel I need to get to fit the engine (photo attached)

The shaft has 2 flats ground into it and the round portion measures out to be 7mm.

The threads seam to be about 5mm.

I need to know where to buy the flywheel & a collet (3/16" Shaft) for the engine.

Any help would be great.

Thanks

Joe

 

[Jim Mamaril]

Hello All

I ordered a JAE .12 Kit from Zip Kits.

I am going to put a OS MAX .18 TZ engine in it I had from my 1/10 scale truck racing days.

I know the Kit says .12 but I want to try it out anyway....LOL

I need to know what flywheel I need to get to fit the engine (photo attached)

The shaft has 2 flats ground into it and the round portion measures out to be 7mm.

The threads seam to be about 5mm.

I need to know where to buy the flywheel & a collet (3/16" Shaft) for the engine.

Any help would be great.

Thanks

Joe

Joe, This flywheel and collet should work with an Octura coupler, you will want to use a .150 cable with a 3/16 stub shaft.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMAJ2&P=0

Jim

 

[Geraghty]

Hello All

I ordered a JAE .12 Kit from Zip Kits.

I am going to put a OS MAX .18 TZ engine in it I had from my 1/10 scale truck racing days.

I know the Kit says .12 but I want to try it out anyway....LOL

I need to know what flywheel I need to get to fit the engine (photo attached)

The shaft has 2 flats ground into it and the round portion measures out to be 7mm.

The threads seam to be about 5mm.

I need to know where to buy the flywheel & a collet (3/16" Shaft) for the engine.

Any help would be great.

Thanks

Joe

I believe this is the flywheel you will need......check it out on this website.....

http://www.solingerrc.com/

 

[HOTWATER]

Hello All

I ordered a JAE .12 Kit from Zip Kits.

I am going to put a OS MAX .18 TZ engine in it I had from my 1/10 scale truck racing days.

I know the Kit says .12 but I want to try it out anyway....LOL

I need to know what flywheel I need to get to fit the engine (photo attached)

The shaft has 2 flats ground into it and the round portion measures out to be 7mm.

The threads seam to be about 5mm.

I need to know where to buy the flywheel & a collet (3/16" Shaft) for the engine.

Any help would be great.

Thanks

Joe

I believe this is the flywheel you will need......check it out on this website.....

http://www.solingerrc.com/

That is the one that I would get...

-Kent

 

[Jim Mamaril]

Hello All

I ordered a JAE .12 Kit from Zip Kits.

I am going to put a OS MAX .18 TZ engine in it I had from my 1/10 scale truck racing days.

I know the Kit says .12 but I want to try it out anyway....LOL

I need to know what flywheel I need to get to fit the engine (photo attached)

The shaft has 2 flats ground into it and the round portion measures out to be 7mm.

The threads seam to be about 5mm.

I need to know where to buy the flywheel & a collet (3/16" Shaft) for the engine.

Any help would be great.

Thanks

Joe

I believe this is the flywheel you will need......check it out on this website.....

http://www.solingerrc.com/

Yup that is the one, I had forgotten about the sollinger. I have made a few for myself so I don't really shop for them.

 

[JSCARPINO]

Thank You all

I will check them out Monday...

Joe