hull with winglets on the rear

[stlspeedracer]

Looking for pictures of boats that ran with the rear winglets on the sides..

 

[FloridaScaleBoater]

Looking for pictures of boats that ran with the rear winglets on the sides..

I take it from your request, you have a hull, but no idea what it is, or what it will build. Correct?

Please post a picture of your hull with measurements

LOA

Aft plane

Beam

Center section width

Pickle fork depth

Maybe we can get you going from there

 

[stlspeedracer]

Boat is currently done as tony tiger blue and orange with black stripes... i will post pics when i get home

 

[stlspeedracer]

This is it

 

[Bill Brandt]

Looking for pictures of boats that ran with the rear winglets on the sides..

Here's a top view of my 94 Bud trying to do a high bank turn....https://www.facebook.com/RattlesnakeRC/photos/pb.1015107218517193.-2207520000.1431381923./1015108558517059/?type=3&theater

 

[Samuel Hagan JR]

 

[stlspeedracer]

Thanks bill, Sam that wont work.. going DeWalt does anyone have good pictures of it

 

[Brian Schymik]

De walt or Jasper Engines same hull

 

[Bill Brandt]

Dewalt decals may be an issue. Thats who messed with Wes..just sayin

 

[Hydro Junkie]

As I posted in your other thread, the Madison was sponsored by DeWalt from the middle of the 95 season through the end of the 97 season. During that time, the boat's canard, picklefork depth and tiplets were all changed. When the sponsorship started, the canard with in it's original position, the picklefork depth was 125" and the boat had tiplets. By the end of the 97 season, the canard had been moved forward roughly 12" to the front of the cockpit, the picklefork depth was reduced to 110" and the tiplets were gone. This will make registering the boat problematic since there are so many variables to build an accurate scale that matches the limited photographic documentation that's available