Hull question - MHR # 6740?

[dschigoda]

I would like to use the spooneferx kit Karlson hull # 6740 (yellow,green Barhdal, etc.) to build the Karlson hull # 6812 Miss Vernors. All the dimensions shown in the Master Hull Roster are the same for both hulls (30'L, 13'2" W, 6'8" tun, 2'4" D, 15'6" APL). From the few photos I've seen, the two hulls appear identical.

Does anyone know if there are any major (or noticeable) differences between these two hulls? I thought I read somewhere that the Karlson #6812 was "thinner" than any other roundnose unlimited made? But the MHR appears to say otherwise?

Thanks!

 

[Hydro Junkie]

Yes, the boats are compatible. If you go to http://www.newtonmarine.com and look at plan set 102, you will find both boats along with 30 or so other paint schemes the plans will make

 

[Racer56]

Yes, the boats are compatible. If you go to http://www.newtonmarine.com and look at plan set 102, you will find both boats along with 30 or so other paint schemes the plans will make

it is newton plan 101 and the karelsons will make 12 different hulls acording to the MHR

 

[dschigoda]

Thanks!