DonSoper
Well-Known Member
- Joined
- Feb 5, 2009
- Messages
- 187
I am still having trouble. I started with a Prather 230 prop, then I went to an x447. I even tried a Prather 220 just to see if I unload it if it will run. It goes about 30' & dies. I am running 60% fuel. I have tried different needle settings from 2 turns all the way to 5 turns in 1/2 turn increments. I have a hyperformance head button, which has less volume, set at.0015" clearance. I have tried Irwin pipes both muffled & un-muffled.
I am getting very frustrated. :angry: Any help would be appreciated.
I am getting very frustrated. :angry: Any help would be appreciated.