Cmb remote needle

[warlokboats]

Has anyone used one with success? I have never had any experience with one and wanted some input.

 

[Lennard Cuenco]

work as good as BVM on my boats....seals can get sticky...hadda swap them out

 

[Steven Bryant]

Ive used them for years without a problem in hydros and monos

Sent from my iPhone using Tapatalk

 

[dave roach]

I would go with Don Ferrette needle base and a OS inflight needle assy.

Dave

 

[Butch Londrigan]

Never had a problem with them. Had them in my old jae's 21 and 45 for 4 years. Never changed o-rings but did flush them out when done running.

 

[warlokboats]

Thanks guys. Got one with my 21 beta and was trying to save some coin.

 

[Timbo Whalen]

Throughout the years, we've stuck with the OS #71703009...

Our current project we're using the OS In Flight, with a KRE base.

Would like to try a Don Ferrette base on this next boat we're

going to start on.

Thanks-

tim

 

[brad nichols]

I think don's bases are a better way to go as they are compact and with tubs getting smaller, room in the engine bay is getting less. With the CMB and Bob Violett needles the amount of room to mount and run fuel lines is alot greater. They are all good when they seal and will do the job just remember that the sharper needle is for the small motors.

Brad

 

[Michael Costanzo]

have used them with good luck,the only thing is to flush them out because for some reason(the steel they are made with) they will rust up right away,but other than that a good accurate needle.

 

[Stuart Barr]

I do not recommend the CMB valve. I did not have consistent performance with them. I do have the new Bob Violet's (now the Stu Barr valve) in stock for $70.00.

Stu

 

[Robert Pickard]

I love the K needle

 

[Mike Betke]

Thanks guys. Got one with my 21 beta and was trying to save some coin.

I use the stock needle valve that comes with the 21 beta with no real issues. It does not have much 3rd channel range when moving it on my flow meter, so there are better options, but it will work.