Travis Benjamin
Well-Known Member
- Joined
- Jan 24, 2012
- Messages
- 147
I'm in the research stage of building a 37" Twin Brushless Mono hull and have a few questions that maybe the gurus here can help me with. I plan to use CR props and the only ones I can find from octura are 42 and 47mm. If I plan to use a 47mm lets say 50mm max., how far apart should I mount the stinger struts in order for the props to get a good bite. I'm a fraid if theyre too close they may cavitate and if too far I might not be able to control the handling at high speeds with my trim tabs Anyone have any design suggestions?
Here's CAD drawing of the motor mount setup I plan to use. But I need to get more some direction before I have it CNC'd Current Design is setup with 65mm from center to center or prop shafts
Here's CAD drawing of the motor mount setup I plan to use. But I need to get more some direction before I have it CNC'd Current Design is setup with 65mm from center to center or prop shafts
Last edited by a moderator: