J jfm Active Member Joined Aug 8, 2005 Messages 42 Oct 17, 2005 #1 On a Mod 3.5 tunnel, how much torque are most using for a throttle servo? ...3rd channel, same question? Seems like a single 75-125 in/oz is OK for steering?
On a Mod 3.5 tunnel, how much torque are most using for a throttle servo? ...3rd channel, same question? Seems like a single 75-125 in/oz is OK for steering?
MarkScott Well-Known Member Joined Oct 5, 2014 Messages 3,087 Oct 17, 2005 #2 I'm using Futaba S3101 for both throttle and 3rd channel with no problems.
Jerry Dunlap Well-Known Member Supporting Member Joined Apr 1, 2002 Messages 4,071 Oct 17, 2005 #3 A standard servo will work fine for throtle and/or mixture. JD
RIGGERMORTISE Well-Known Member Joined Jan 30, 2003 Messages 880 Oct 17, 2005 #4 JR DS811 for steering and MS81MG for throtle and mixture. Nemesis, MAC SPP combo
Grimracer Well-Known Member Joined Dec 27, 2001 Messages 9,502 Oct 19, 2005 #5 Airtronics 94358 or 9 steering 94555 on power and mix. You can also use the 94147s but they are larger. Grim
Airtronics 94358 or 9 steering 94555 on power and mix. You can also use the 94147s but they are larger. Grim