boaterbill
Well-Known Member
- Joined
- Dec 15, 2003
- Messages
- 456
Hull is white gel coat, four strakes on the bottom, motor mount tapped for NR, AB third ch needle, three Hitec servos, volt meter, fail safe, speedmaster hardware, runned half dozen times, hull has about five marks made by prop of boat that ran into me, they did not go thru the hull, they are on right side where deck ends and side starts down, most are covered by the pinstring tape. Futaba rx no crystal
Will mail pics if interested, serious only please. E mail me. [email protected]
$250 + shpng
Bill
Will mail pics if interested, serious only please. E mail me. [email protected]
$250 + shpng
Bill
Last edited by a moderator: