- Joined
- Oct 23, 2002
- Messages
- 6,451
*** Sorry guys, I meant to put this in the manufacturer section. Forgive me.*****
Guys, I wont bore you with the details, but I got scammed buy a couple guys in Singapore who placed a LARGE order and paid with stolen credit cards. I was lucky enough to not have shipped all of their merchandise out before finding out about it, but now I need to move this stuff to help recoup some of my money.
I have five (5) Futaba 3 Channel, FM, 75 MHZ, 3PM-FS radio sets. These are the synthesized radios, so you wont have to use crystals again. These kits have NO servos, its just the radio, reciever, battery holder, switch, manual, and screw driver to change frequencies. This is great equipment, and will work perfectly for just about any boat. Here are some specs, courtesy of Tower Hobbies.
This is the 75MHz Futaba 3PM-FS Pro Pistol Grip 3-Channel Synthesized Computer
Radio with the R303FHS Synthesized Receiver, FUTL7620.
Does not include servos or mounting hardware.
FEATURES: New design considers operability and weight balance
PLL synthesized system is easy to change the frequency just by
selecting a desired frequency on the transmitter screen.
LCD display and four edit keys for easy data setup
Two function groups- frequently used functions/ system functions
HRS Transmission Modulation (HRS) provides three times faster
response when used with digital servos
Fail Safe (on HRS mode only) returns servos to a neutral or preset
position in the event of interference or malfunction
R303FHS receiver instantly detects whether transmitter is in HRS or
FM mode
Ten model memory
Programmable switches and buttons, programmable mixing
Digital steering and throttle trims
Steering dual rates and steering speed
Steering/throttle exponential
ABS braking
Brake mixing
Steering, brake/throttle and 3rd channel End Point Adjustment
Charge jack for optional transmitter NiCds
Throttle acceleration
Racing timer
Condition 2 select
Tension adjustment function
Trigger stop function
High luminosity blue LED pilot lamp (can select brightness)
INCLUDES: 3PM-FS transmitter with synthesized module and antenna
R303FHS synthesized receiver, FUTL7620
Instruction manual
Battery box, FUTM1595
Switch harness, FUTM4350
Mini screwdriver
Warranty card
REQUIRES: Digital servos when used in HRS mode
8 AA cells or NT8F700B NiCd battery for tranmsitter
4 AA cells or NiCd pack for receiver
optional: Charger FUTM1830
SPECS Transmitter
Operating System: FM/PPM, HRS/FM
Transmitting Frequency: 75Mhz
Power Supply: 9.6V NiCd
Current Drain: 250 mA or less
Receiver: R303FHS
Length: 1.56" (39.5mm)
Width: 1.09" (27mm)
Height: 0.57" (14.5mm)
Weight: 0.60oz (17g)
Receiving Frequency: 75MHz (channels 61-90)
Intermediate Frequency: 455kHz
Power Supply: 6.0V (NiCd 5 cells)
Current Drain: Approx. 95mA
COMMENTS: Radio is sold without servos, REQUIRES DIGITAL SERVOS ONLY and 6V
when using an HRS receiver. Non-digital servos are fine on PPM/PCM.
For optional NiCd pack use either FUTM1463 or FUTM1440.
If you would like to use optional NiCds with your transmitter, we
recommend an assembled pack, not individual cells. If individual
NiCd cells are used the battery tray could be damaged during
charging.
Couple pictures of the actual product.
Thes are BRAND NEW. My price for each radio set is $135.00. This is $35.00 dollars cheaper than Tower Hobbies, and as always, the shipping is INCLUDED in the price to the US and Canada. I will ship these via priority mail.
First responders to THIS THREAD have priority.
Thanks, James "becarefulofsingaporeorders" Clegg.
**Edit, not sure how a picture of my truck ended up in this, but its not for sale. However, since it is such an awesome truck, I will leave it in the post. **
Guys, I wont bore you with the details, but I got scammed buy a couple guys in Singapore who placed a LARGE order and paid with stolen credit cards. I was lucky enough to not have shipped all of their merchandise out before finding out about it, but now I need to move this stuff to help recoup some of my money.
I have five (5) Futaba 3 Channel, FM, 75 MHZ, 3PM-FS radio sets. These are the synthesized radios, so you wont have to use crystals again. These kits have NO servos, its just the radio, reciever, battery holder, switch, manual, and screw driver to change frequencies. This is great equipment, and will work perfectly for just about any boat. Here are some specs, courtesy of Tower Hobbies.
This is the 75MHz Futaba 3PM-FS Pro Pistol Grip 3-Channel Synthesized Computer
Radio with the R303FHS Synthesized Receiver, FUTL7620.
Does not include servos or mounting hardware.
FEATURES: New design considers operability and weight balance
PLL synthesized system is easy to change the frequency just by
selecting a desired frequency on the transmitter screen.
LCD display and four edit keys for easy data setup
Two function groups- frequently used functions/ system functions
HRS Transmission Modulation (HRS) provides three times faster
response when used with digital servos
Fail Safe (on HRS mode only) returns servos to a neutral or preset
position in the event of interference or malfunction
R303FHS receiver instantly detects whether transmitter is in HRS or
FM mode
Ten model memory
Programmable switches and buttons, programmable mixing
Digital steering and throttle trims
Steering dual rates and steering speed
Steering/throttle exponential
ABS braking
Brake mixing
Steering, brake/throttle and 3rd channel End Point Adjustment
Charge jack for optional transmitter NiCds
Throttle acceleration
Racing timer
Condition 2 select
Tension adjustment function
Trigger stop function
High luminosity blue LED pilot lamp (can select brightness)
INCLUDES: 3PM-FS transmitter with synthesized module and antenna
R303FHS synthesized receiver, FUTL7620
Instruction manual
Battery box, FUTM1595
Switch harness, FUTM4350
Mini screwdriver
Warranty card
REQUIRES: Digital servos when used in HRS mode
8 AA cells or NT8F700B NiCd battery for tranmsitter
4 AA cells or NiCd pack for receiver
optional: Charger FUTM1830
SPECS Transmitter
Operating System: FM/PPM, HRS/FM
Transmitting Frequency: 75Mhz
Power Supply: 9.6V NiCd
Current Drain: 250 mA or less
Receiver: R303FHS
Length: 1.56" (39.5mm)
Width: 1.09" (27mm)
Height: 0.57" (14.5mm)
Weight: 0.60oz (17g)
Receiving Frequency: 75MHz (channels 61-90)
Intermediate Frequency: 455kHz
Power Supply: 6.0V (NiCd 5 cells)
Current Drain: Approx. 95mA
COMMENTS: Radio is sold without servos, REQUIRES DIGITAL SERVOS ONLY and 6V
when using an HRS receiver. Non-digital servos are fine on PPM/PCM.
For optional NiCd pack use either FUTM1463 or FUTM1440.
If you would like to use optional NiCds with your transmitter, we
recommend an assembled pack, not individual cells. If individual
NiCd cells are used the battery tray could be damaged during
charging.
Couple pictures of the actual product.
Thes are BRAND NEW. My price for each radio set is $135.00. This is $35.00 dollars cheaper than Tower Hobbies, and as always, the shipping is INCLUDED in the price to the US and Canada. I will ship these via priority mail.
First responders to THIS THREAD have priority.
Thanks, James "becarefulofsingaporeorders" Clegg.
**Edit, not sure how a picture of my truck ended up in this, but its not for sale. However, since it is such an awesome truck, I will leave it in the post. **
Last edited by a moderator: