2013 New Riggers, Let's see um!

[RaceMechaniX]

I just saw a sneak peek of Maher's new rigger(s), looks pretty bullish to lay a whooping at Hobart.

 

[Terry Keeley]

Hope this post works OK. After last season I bought a Head Hunter rigger. Made by Mike Hallam. Came with an OPS 45 and a pipe.

Saw this at our last club meeting, was hardly run, Jim stole it!

 

[Glenn Quarles]

2 1/2 lb tub / 12 oz front sponson's / 2oz rear sponson's / 5 oz cowl ..........

Re-desinged she is Gas ~ 2 1/2 months to build .............

Rick,

Nice boat.....but......You gotta tell us about your car project in the background. Judging by the engine access panels, must be some kind of old roadster!!!!

Yeah, it looks like my '29 with the '32 front end!

GQ

 

[Greg Bonahoom]

Well it was finally warm enough up here to paint out in the garage. Here is my new JAE with a NovaRossi .46

 

[gil sonsino]

This is my saw Fe rigger (c.f built) equipped with a Neu motor 1527 1D(2300kv) to run on 6S. The nitro version is under construction equipped with a Nova 46.Gill

 

[RonShaw]

This is my saw Fe rigger (c.f built) equipped with a Neu motor 1527 1D(2300kv) to run on 6S. The nitro version is under construction equipped with a Nova 46.Gill

Gil,

Where did you get your pushrod seals? Never seen them in that color. Thanks.

 

[HOTWATER]

Ron, those are Prather seals...I still have some from my Spitfire I think...

Nice rigger Mr. Gil!!!

-Kent

 

[gil sonsino]

That's right kent...they are old prather seals that were laying in the botton of my old field box.thanks Gill

 

[BobBonahoom]

You can still buy those seals here (part number PRA 8112)

http://www.hyperprod.bizhosting.com/

They also make good antenna mounts. Just bond them down with some RTV silicone.

 

[Mark Stein]

My new Rigger for this year. Finishing the cowl this week and some touchup needed on the rear sponsons

 

[Jerry Dunlap]

Here's a couple of photos of Mike Hughes's twin that he ran for the first time this past weekend at Twin Lakes, Arlington, WA. Mike hopes to be able to attend Hobart and race this boat. The boat is a Hughes design and not surprisingly it has a MH Hardward turn fin. For it's initial runs, the boat is impressive.

JD

 

[Kevin Krogness]

Nice boat and amazing clarity on them pictures!!

 

[ALLAN YUEN]

Here's a couple of photos of Mike Hughes's twin that he ran for the first time this past weekend at Twin Lakes, Arlington, WA. Mike hopes to be able to attend Hobart and race this boat. The boat is a Hughes design and not surprisingly it has a MH Hardward turn fin. For it's initial runs, the boat is impressive.

JD

Wow Mike built modded mix up SGX and JAE twin rigger and run so good MAC84s Good Luck! B)

 

[David Murany]

My new Stealth 45 with a Nova 46.

 

[Mark Stein]

Nice Dave, Like the blue with wood sides

 

[Terry Keeley]

My new Stealth 45 with a Nova 46.

View attachment 47424

View attachment 47425

Sweeeeeeet!

 

[Terry Keeley]

My new Rigger for this year. Finishing the cowl this week and some touchup needed on the rear sponsons

Saw this at Mark's place last weekend, started with one of Mike Nowicki's tubs, very nice build!

 

[shoboat]

David,

The Stealth 45 looks nice but I think it needs a Murany Racing Decal Set on it.

Looks like the paint shop has been very busy this year.

Looking Good,

Mark

 

[RodneyPierce]

Got the cowl all done and painted on my JAE. Here she is ready to hit the water this weekend:

 

[Tim_Duggan]

RP,

Looks good! One question though, have you got enough clearance between the carb inlet and the cowl?

TD.