2 Quick GAS FireFighter Questions

[Ralphie]

Can you please answer a couple of quick questions on your FireFighter Gas Rigger

1. What should the C/G be ?

2. What angle should the motor be set at ?

Thanks

Ralph

 

[TomMoorehouse]

Just try to keep things forward without doing anything radical and you be in good shape

mine is at roughly about 3 degrees

 

[Rigged]

I had the motor almost level in mine, as far foward as it would go. Good luck....mine ran good on flat water, and very unpredictable in the chop.

 

[Ralphie]

Thanks for the help guys !

 

[Ralphie]

Just try to keep things forward without doing anything radical and you be in good shape

mine is at roughly about 3 degrees

Wow, 3 degrees doesn't sound like much, but who am I to question Tom !

Also any good recommendations on a good turn fin ?

Thanks again

Ralph

 

[Rigged]

Just try to keep things forward without doing anything radical and you be in good shape

mine is at roughly about 3 degrees

Wow, 3 degrees doesn't sound like much, but who am I to question Tom !

Also any good recommendations on a good turn fin ?

Thanks again

Ralph

IF you can get one... Crapshooter 90 fin was what mine really liked.

 

[Jerry Muro]

Ralphie I use a Road Runner turn fin on my FF gas and it worked great. oppiste of Will's ran great in the rough and not so good on flat water

 

[Rigged]

Jerry i didnt know you had a FireFighter. I tried everything in the world on mine to get it to run in the rough. It just did not want to. Only boat ive ever seen hook out of nowhere while milling. I finally gave it a nice funeral with some gas and a lighter :blink:

 

[Ralphie]

Thanks for the info, Guys !

 

[Roxyflash]

The Accutech turn fin works well.Redline has them

 

[Roxyflash]

heres a picture

 

[Ralphie]

thanks again guys !