nitrotwin
Well-Known Member
- Joined
- Mar 18, 2007
- Messages
- 792
OK guys, its here!!! Let me start by saying Fedex delivery sucks. OK, now I feel better.
I have a few questions that will require referring to the pics attached. In the first pic it shows the drive dog and flex shaft installed. Please notice the gap between the drive dog and the flex shaft tube. Should the flex cable be shortened? The face of the shaft tube is worn. Sould this be machined flat?
In the last pic, the fuel adjustment for the carburetor is in line and not on the carburetor like I am used to. Is this standard or re-engineered?
Measurements - 40" from tip to transom and is running a 67 Mac. Fueled by Ritches Brew 50% full synthetic with cmb quiet pipe. What glow plug should I use? McCoy9? The fuel tank pressure hose from the pipe was not used. Shuld this be hooked back up? Sorry for the silly questions coming over from the car side.
Any help would be appreciated.
I have a few questions that will require referring to the pics attached. In the first pic it shows the drive dog and flex shaft installed. Please notice the gap between the drive dog and the flex shaft tube. Should the flex cable be shortened? The face of the shaft tube is worn. Sould this be machined flat?
In the last pic, the fuel adjustment for the carburetor is in line and not on the carburetor like I am used to. Is this standard or re-engineered?
Measurements - 40" from tip to transom and is running a 67 Mac. Fueled by Ritches Brew 50% full synthetic with cmb quiet pipe. What glow plug should I use? McCoy9? The fuel tank pressure hose from the pipe was not used. Shuld this be hooked back up? Sorry for the silly questions coming over from the car side.
Any help would be appreciated.
Last edited by a moderator: