WTB 24"teflon lined tube for 1/4 flex drive shaft

[Foolwitools]

Hi Guys!

Just like it says, lined, bendable stuffing tube for a 1/4" flex drive.

If you have a used one that you think can be re-bent, I might be able to use it.

22" might just make it..........

Thanks,

Bob the Fool :blink:

 

[SayMikey]

Hi Guys!
Just like it says, lined, bendable stuffing tube for a 1/4" flex drive.

If you have a used one that you think can be re-bent, I might be able to use it.

22" might just make it..........

Thanks,

Bob the Fool :blink:

99946[/snapback]

​

try Gary Preusse

 

[Foolwitools]

Hi Again.

I talkedto Gary P. to order some other stuff just before I posted this "WTB"

I know where to get new stuff, thanks. I also know where to get a 32 foot Chris Craft Stinger with twin turbo 454 motors............ I can't afford the chriscraft either...........

Posting here is a way to look for inexpensive parts and allow your fellow boaters to get rid of some of their extra parts.

I'm on a budget......... If you're not, God Bless.

Bob the Fool :blink:

 

[P THOMAS]

Hi Guys!
Just like it says, lined, bendable stuffing tube for a 1/4" flex drive.

If you have a used one that you think can be re-bent, I might be able to use it.

22" might just make it..........

Thanks,

Bob the Fool :blink:

99946[/snapback]

​

I have a straight 21 1/2" tube with 30 " lining and a 24" squared flex shaft

I dont need this what is worth to you?

 

[Foolwitools]

Hi Phil,

How close to the drive collet does the tube have to be? if it can be about 1 1/2" away, I can use the parts you have.

I have no idea what these are worth........... Hows $20 sound??

If you need more for shipping, you gotta say so.

Let me know.

Bob the Fool

 

[P THOMAS]

Hi Phil,
How close to the drive collet does the tube have to be?  if it can be about 1 1/2" away, I can use the parts you have.

I have no idea what these are worth...........  Hows $20 sound??

If you need more for shipping, you gotta say so.

Let me know.

Bob the Fool

100650[/snapback]

​

the 1 1/2" should be ok with 1/4 cable. if you need it a bit longer you can get a 12 inch piece one size bigger and solder it over the long tube.

$20 is ok

Use my email address for a pay pal or you can send it by mail.

thanks PHIL THOMAS

 

[Foolwitools]

Hi Again Phil,

It's a deal..... Thanks!!

Paypal is on the way............

Bob the Fool :blink:

 

[P THOMAS]

Hi Again Phil,
It's a deal..... Thanks!!

Paypal is on the way............

Bob the Fool :blink:

100687[/snapback]

​

OK thanks I have been tied up this week I will get the shaft out to you i hope saturday. PHIL T