• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to buy a flow meter for tuning a twin

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

charles siler

Well-Known Member
Joined
Oct 29, 2011
Messages
2,004
Ok check out boris and look like he hasnt been on IW in a while I want a new or like new gen 3 or 4

Flowmeter for my twin and be able to tune a single also . help me out is boris DOA or just on a Cruise

somewhere thanks Charlie
 
The Gen 3 & 3A versions works well with the 67/84/90/91 motors. Accurate and true readings. The 4 may give more air flow but the 3 will work fine on the big blocks. For that matter so did my version 1 unit.
 
The Gen 3 & 3A versions works well with the 67/84/90/91 motors. Accurate and true readings. The 4 may give more air flow but the 3 will work fine on the big blocks. For that matter so did my version 1 unit.
Very accurate information

Nails
 
I started with a propane magnehelic. Never a problem. Always spot on I bought a Boris. Very nice unit for strictly airflow. This past year at a race I just wasn't running at potential. I checked the Boris and made a click adjustment. I ran better. Next heat I checked the Boris and it said fine. I checked the magnehelic and it said lean 3 clicks to get it right. I figured what the heck, trust it. My boat was explosively faster. Maybe coincidence. I like using both.
 
Thanks Greg and John. I picked up a gen3 mostly for my tunnels. May do a 67 or 80 once in a while. Mainly using to re-establish baselines.
 
Thanks Greg.

Happy Holidays to you and your buddies in Aussie Land!!!.... ;)
 
Last edited by a moderator:
Back
Top