Want to buy a flow meter for tuning a twin

[charles siler]

Ok check out boris and look like he hasnt been on IW in a while I want a new or like new gen 3 or 4

Flowmeter for my twin and be able to tune a single also . help me out is boris DOA or just on a Cruise

somewhere thanks Charlie

 

[Wasted wages]

I have an original Tidewater flowmeter for sale if you are interested...... 200.00

 

[mrgary]

Ok check out boris and look like he hasnt been on IW in a while I want a new or like new gen 3 or 4

Flowmeter for my twin and be able to tune a single also . help me out is boris DOA or just on a Cruise

somewhere thanks Charlie

sent pm

 

[moe1117]

I have one for sale for $70.00 it's on page 5

Mark

 

[charles siler]

I have one for sale for $70.00 it's on page 5

Mark

Hi Mark could'nt find it page 5 when I looked has a miller american hydro and another hydro did'nt see

any flowmeter on that page what is it exactly . thanks Charles

 

[XtremeRcBoats]

Charles, see this link: http://www.intlwaters.com/index.php?showtopic=54206

 

[charles siler]

Thankz guys Boris got me going with a gen 4.

 

[ALLAN YUEN]

Thankz guys Boris got me going with a gen 4.

Yes better buy new G4 through Boris Thumb up!!

 

[Rhonda Pickard]

Boris meter is only way to go now a days Robert

 

[RonShaw]

Whats the difference between gen 3 and gen 4????

 

[John Knight]

The Gen 3 & 3A versions works well with the 67/84/90/91 motors. Accurate and true readings. The 4 may give more air flow but the 3 will work fine on the big blocks. For that matter so did my version 1 unit.

 

[Bob Morton]

The Gen 3 & 3A versions works well with the 67/84/90/91 motors. Accurate and true readings. The 4 may give more air flow but the 3 will work fine on the big blocks. For that matter so did my version 1 unit.

Very accurate information

Nails

 

[Bill Brandt]

I started with a propane magnehelic. Never a problem. Always spot on I bought a Boris. Very nice unit for strictly airflow. This past year at a race I just wasn't running at potential. I checked the Boris and made a click adjustment. I ran better. Next heat I checked the Boris and it said fine. I checked the magnehelic and it said lean 3 clicks to get it right. I figured what the heck, trust it. My boat was explosively faster. Maybe coincidence. I like using both.

 

[RonShaw]

Thanks Greg and John. I picked up a gen3 mostly for my tunnels. May do a 67 or 80 once in a while. Mainly using to re-establish baselines.

 

[RonShaw]

Thanks Greg.

Happy Holidays to you and your buddies in Aussie Land!!!....