I would like to ask a recomended starting length for a OS .21 with a 180 degree header and tuned pipe?
measured from the glow plug to widest part of pipe.
Thank you to all replies
Steve
nice link... now to convert cm into inches :unsure:I would like to ask a recomended starting length for a OS .21 with a 180 degree header and tuned pipe?
measured from the glow plug to widest part of pipe.
Thank you to all replies
Steve
Look at the following link (and if it does not redirect you then "Cut & Paste" :
http://www.nimrifmodels.co.uk/setup.html
21 cm = 210mm = 8.25"nice link... now to convert cm into inches :unsure:I would like to ask a recomended starting length for a OS .21 with a 180 degree header and tuned pipe?
measured from the glow plug to widest part of pipe.
Thank you to all replies
Steve
Look at the following link (and if it does not redirect you then "Cut & Paste" :
http://www.nimrifmodels.co.uk/setup.html
1 centimeter = 0.393700787 inches Multiply # of cm's by .394= inchesnice link... now to convert cm into inches :unsure:I would like to ask a recomended starting length for a OS .21 with a 180 degree header and tuned pipe?
measured from the glow plug to widest part of pipe.
Thank you to all replies
Steve
Look at the following link (and if it does not redirect you then "Cut & Paste" :
http://www.nimrifmodels.co.uk/setup.html
There we go! i couldnt remember that right off the top of my head, but that is what I was lookign for! Thanks Dan for reminding me pal! Rodan easier thing to remember is that there are exactly 2.54cm per inch.
nice short number.
Enter your email address to join: