[email protected]
Well-Known Member
- Joined
- Nov 6, 2002
- Messages
- 4,025
I'm putting together an Aeromarine .21 Cat. It's an older Jesse James hull but I've rebuilt it into great shape. I'll be running a CMB .21 Green Head with a Rossi pipe. I'm gonna use an extended rudder straight over the prop shaft assembly connected to a square drive.
What size tank are you guys using?? 6,8, or 10 oz? I was gonna put it to the right side of the motor and lean the pipe over it but thought that might not be to bright should it get hot and melt the tank. So I'm gonna mount the pipe to the left.
My other option was to cut out the center bulk head and slip in my metal tank. I'm not a big fan of these tanks since you can't tell when there full and with the motor blocking it it wouldn't be convenient to pull out should something go wrong.
Give me some advice what's best. Also, is a Hi-Tec 645MG good enogh to turn this boat?
:unsure:
What size tank are you guys using?? 6,8, or 10 oz? I was gonna put it to the right side of the motor and lean the pipe over it but thought that might not be to bright should it get hot and melt the tank. So I'm gonna mount the pipe to the left.
My other option was to cut out the center bulk head and slip in my metal tank. I'm not a big fan of these tanks since you can't tell when there full and with the motor blocking it it wouldn't be convenient to pull out should something go wrong.
Give me some advice what's best. Also, is a Hi-Tec 645MG good enogh to turn this boat?
:unsure:
Last edited by a moderator: