quick draw deep vee pipe in aeromarine conquest

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tristen therrien

Active Member
Joined
Jan 29, 2012
Messages
39
ok i need help i have an aeromarine conquest and im runing a quick draw deep vee pipe and the pipe is allways turning from side to side and the problem is that it his the hull when it slide or pivits from side to side please help
 
Slide a silcone tube over the Hotpipe stinger , find a alu-tube that fits over the silcone-tubing ,

slide that over the stinger , and make that alu-tube your hull-exit.

find a silicone-tube that fits over the alu-tube , and another alu-tube that slide over that.

That alu-tube can be epoxied into you stern.

Something like this :

ES-QD_DeepVext..jpg
 
I had the same issue when I ran a setup like that. When using that style pipe there needs to be a pair of mounts offset from the center of the pipe to constrain it against rotation. I welded a tube to the side of the pipe into which a piece of ~1/8" wire fit, then attached the other end of the wire to the stringer. It kind of worked.
 
Back
Top