question about props

[michamerlin]

hi

can someone say me what for a prop size i nedded for a 46 mono.

what and why is better? 2 blade ore three blade props?

who can say me a good shop? the shop muss shipping to germany?

thanks michael

PS: sorry for my english

 

[Duck899]

hican someone say me what for a prop size i nedded for a 46 mono.

what and why is better?  2 blade ore three blade props?

who can say me a good shop? the shop muss shipping to germany?

thanks michael

PS: sorry for my english 

105397[/snapback]

​

If its surface drive......Octura x-450/3

Subsurface................Octura x-447/2 or so...... (old school tech)

3 blade props are more efficient......

 

[gil sonsino]

Michael there is awide variety of props for a 45 mono

You can go with Octura X445,X447,X447/3,X448,x450 or Prather 240,245.

Three blades are good but not the fastest props!

Gill

 

[Eric Canto]

Depending on the handling characteristics of your boat, a two blade prop may offer a little more speed than a three blade. I agree that two blade props are generally a little faster, but many times the superior handling of a three blade prop allows for consistently greater speeds in heat race water. If you need any race ready props, we have many in stock. I would start with an x450 and an x450/3 and Prather 240

Eric Canto

The Speed Shop

 

[Scooter12195]

hican someone say me what for a prop size i nedded for a 46 mono.

what and why is better?  2 blade ore three blade props?

who can say me a good shop? the shop muss shipping to germany?

thanks michael

PS: sorry for my english 

105397[/snapback]

​

Are you refering to 46 inch mono or are you talking about an engine size? If you are talking length, what engine are you running and is it surface or subsurface drive?

Scott Norris

 

[michamerlin]

Are you refering to 46 inch mono or are you talking about an engine size? If you are talking length, what engine are you running and is it surface or subsurface drive?

hi scott

im talking from the engine size.

and i have a surface drive

michael

 

[michamerlin]

If you need any race ready props, we have many in stock.  I would start with an x450 and an x450/3 and Prather 240
Eric Canto

The Speed Shop

105493[/snapback]

​

hi eric

have you a link to the speed shop?

thanks michael

 

[Scooter12195]

Are you refering to 46 inch mono or are you talking about an engine size? If you are talking length, what engine are you running and is it surface or subsurface drive?

hi scott

im talking from the engine size.

and i have a surface drive

michael

105630[/snapback]

​

Eric has made good recomendations for props then.

Have Fun!

Scott

 

[bbnate804]

can't go wrong with eric. eric has been great to me with props and service.

nate