Picco .80 EXR Bluehead

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Marc Ohler

Well-Known Member
Joined
Feb 28, 2007
Messages
202
O.K. guys, I need some input on the absolute best pipe choice for this particular engine .

I have quit a few pipes to choose from.

It will be going in my .80 sgx.

Any, and all info accepted.

Thank's ,

Marc :)
 
O.K. guys, I need some input on the absolute best pipe choice for this particular engine .
I have quit a few pipes to choose from.

It will be going in my .80 sgx.

Any, and all info accepted.

Thank's ,

Marc :)
Picco 90 pipe or a 5780OPS or a short (11 inches) 13cc mac pipe products.
 
O.K. guys, I need some input on the absolute best pipe choice for this particular engine .
I have quit a few pipes to choose from.

It will be going in my .80 sgx.

Any, and all info accepted.

Thank's ,

Marc :)
Picco 90 pipe or a 5780OPS or a short (11 inches) 13cc mac pipe products.

Joe, what type of muffler?
I run a Lenny Blake Bolt on...... or a Harry Gerhart ([email protected]) Bolt on mufflers. Both are under 92db & do not effect performance. We have always ran the 90 size pipes on the Picco 67-80 @ 11 11 1/4 long. I recentlly found the Older Dull looking ( almosy Gray in color) Picco 90 pipes Zing the engine Like NO OTHER Pipe...... The OPS 5780 (90) pipe works very well also..... set the squish band @ .020 for 60 percent.
 
Last edited by a moderator:
The infomation that Joe has offered is CORRECT. The vairations to that are mods on the motor, water type and altitude. The three pipes that are mentioned will react to the motor in three different way.

1. Picco pipe is RPM / OPS will do the same thing.

2. 80/13cc Mac will midrange/RPM

3. 90/15cc Mac will LOW END

also header size will effect this as well. 90 Picco vs. 60 Picco headers. B)
 
Last edited by a moderator:

Latest posts

Back
Top