Ossi 1/4 scale setups

[winston]

Hi all, Please any one can send me some info and measurements of how and where to fit a G-Morty lower on an Ossi 1/4 scale Tunnel.??? DO NOT WORRY I AM NOT COMING TO THE WORLD CHAMPIONS!!!! :lol: :lol: :lol:

All info will be much appreciated Thanks a lot.

~~~`Winston`~~~

 

[KGilbert]

Winston, this is what I have done but as you can see, i haven't got very far so I don't know how this will work.

First I glassed in a piece of 3/8 ply to beef up the transom. In order to not inrease the set back I drilled a new hole further forward on the pivot block to change the angle of the foot relative to the transom. Then to build in some adjustability, I widened the bottom holes on the transom brackets. Because the mounting bolts come through at an upward angle ( actually perpendicular to the transom) I had to drill two access holes on top forward of transome to get a socket on them.

I hope this helps but as you can see it is untested :unsure:

http://i294.photobucket.com/albums/mm90/KM...o/OssiOB001.jpg

http://i294.photobucket.com/albums/mm90/KM...o/OssiOB002.jpg

http://i294.photobucket.com/albums/mm90/KM...o/OssiOB003.jpg

http://i294.photobucket.com/albums/mm90/KM...o/OssiOB006.jpg

 

[winston]

Hi Gilbert, Thanks a lot for the info, Your my man I find this forum very hard to get info about tips and what so ever, I try and get info from many people as much as I can, It is only the beginning, this is the first Tunnel from Ossi I am going to build. any way.

Thanks Pal.

~~~`Winston`~~~