rctinman
Well-Known Member
- Joined
- Dec 5, 2003
- Messages
- 1,605
Hi Folks. Cleaning up the shop, and finding a few things I no longer need. Prices do NOT include shipping, and untill I find my camera, I don't have any pics. (Now where did I leave that)
1: 4 - Picco brass flywheel collets. part #3023. Fits 1/4-28 crankshafts, EXR 45, Bluehead 45, and Blackhead 45 w/ 1/4-28 crank. NIP SOLD
2: Nitromethane Hydromiter. This is a laboratory grade instrument, shaped like a large oral thermometer that you flote in a container of fuel, and will read the nitromethane content. Quite acurate. Drag racers use them. SOLD
3: Irvine 40R 6.5cc Marine engine. Drum rotor, ABC, over-the-flywheel exaust. Although I wouldn't call this a full race motor, it is much more than a sport motor, very well made. Would work great as a beginner sport 40, or mono engine. New, no box or papers. $95.00
4: Aluminum Stuffing Tube T-Bar mount. I guess the Gas boys are using these in there monos to mount the stuffing tube up by there motors between 5" rails. New $20.00
5: Phil Thomas Sport 40 rear radio box. New, undrilled. SOLD
6: Stainless 1/8th Scale Unlimited turn fin, & milled aluminum bracket (wish I had the camera for this :blink: ) SOLD
7: Novak Mercury, 2ch, FM, receiver. Used, works great, no crystal. $13.00
8: 3/4" id, 1/8th wall silicone exaust tubing. Same stuff that Ron VanWagnen sold. (Good stuff) $5.00 per foot.
9: Mitutoyo 0 - 4" w/2.4" base, Depth Micrometer in wood case. Used, but nice. $50.00
10: Nova Rossi 21 slide valve carb. $10.00
11: Bar stock front end for a K&B 7.5 New, $5.00
12: CB Marine Exaust Throttle for K&B 7.5 Used, $15.00
Thats it for now. May add more soon.
Thanks for looking!
Steve Ball
1: 4 - Picco brass flywheel collets. part #3023. Fits 1/4-28 crankshafts, EXR 45, Bluehead 45, and Blackhead 45 w/ 1/4-28 crank. NIP SOLD
2: Nitromethane Hydromiter. This is a laboratory grade instrument, shaped like a large oral thermometer that you flote in a container of fuel, and will read the nitromethane content. Quite acurate. Drag racers use them. SOLD
3: Irvine 40R 6.5cc Marine engine. Drum rotor, ABC, over-the-flywheel exaust. Although I wouldn't call this a full race motor, it is much more than a sport motor, very well made. Would work great as a beginner sport 40, or mono engine. New, no box or papers. $95.00
4: Aluminum Stuffing Tube T-Bar mount. I guess the Gas boys are using these in there monos to mount the stuffing tube up by there motors between 5" rails. New $20.00
5: Phil Thomas Sport 40 rear radio box. New, undrilled. SOLD
6: Stainless 1/8th Scale Unlimited turn fin, & milled aluminum bracket (wish I had the camera for this :blink: ) SOLD
7: Novak Mercury, 2ch, FM, receiver. Used, works great, no crystal. $13.00
8: 3/4" id, 1/8th wall silicone exaust tubing. Same stuff that Ron VanWagnen sold. (Good stuff) $5.00 per foot.
9: Mitutoyo 0 - 4" w/2.4" base, Depth Micrometer in wood case. Used, but nice. $50.00
10: Nova Rossi 21 slide valve carb. $10.00
11: Bar stock front end for a K&B 7.5 New, $5.00
12: CB Marine Exaust Throttle for K&B 7.5 Used, $15.00
Thats it for now. May add more soon.
Thanks for looking!
Steve Ball
Last edited by a moderator:
