Novarossi massive sale!!!!

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

aaron alberico

Well-Known Member
Joined
Aug 4, 2002
Messages
1,216
Ozspec hobbies\ Novarossi OZ

 

1 Year massive special sale,

 

All pricing in Australian dollars

 

35plus 21m-14.5mm crank, turbo head $450.00aus

TX21MR2/NS 7 port, turbo head $349.00aus

T21-7m, 7 port, standard head $280.00aus

N528MS2 4.6cc 8 port, turbo head $250.00aus

15% off all spare parts,

 

10% off novarossi headers and pipes,

www.ozspechobbies.com

 

[email protected]
 
Last edited by a moderator:
Ozspec hobbies\ Novarossi OZ 

1 Year massive special sale,

 

All pricing in Australian dollars

 

35plus 21m-14.5mm crank, turbo head $450.00aus

TX21MR2/NS 7 port, turbo head $349.00aus

T21-7m, 7 port, standard head $280.00aus

N528MS2 4.6cc 8 port, turbo head $250.00aus

How much for the 35, American dollars and shipping Gary

15% off all spare parts,

 

10% off novarossi headers and pipes,

www.ozspechobbies.com

 

[email protected]
 
Gary35 plus about $360.00us shipping about $15.00us

i think that is close

regards Aaron
Aaron...differences between the two 7-port motors (besides the head). Do they come with the full threaded turbo marine crank and flywheel? Both flat top pistons?

Thanks,

Rick
 
Rick,

TX21MRS/NS is full thread crank, same crank as the 35 plus 14mm [not 14.5mm] turbo head, i like the ports better in the case,

both have flat top piston with dish,

T21-7M 14mm sg crank, standard plud head, also a real nice engine

regards Aaron
 
hi arron,

I m interested in the followngs:

1. N528MS2 4.6cc 8 port, turbo head

2. novarossi tune pipe 50041 (with it suitable with the above 4.66cc engine). are there any pressure fitting fixed on the pipe or i have to do it myself.

3. what manifold to be used for this engine?

Also, i m living in malaysia, will you ship to malaysia?

thanks

Kenneth
 
Hi aaron, I have a RX 21 NOVA ROSSI that needs bearings--1--front bearing 7 mm--19mm--6mm----1--rear bearing 14mm--25.4mm--6mm--- also 1 header with spring,do you have the header that will put the tuned pipe on the right side of my outrigger? If not that's OK. ----need US CURRENCY PRICE AND SHIPPING Please let me know,Joel
 
Hi Aaron,

I was wondering if you have any NR SS parts in stock, and some older LS parts? If you do I can give you some measurements for some pistons and sleeves, maybe even some rods. I have talked with Glenn and some of the stuff he doesn't have, what he doesn't have if you got I will be definitely be needing.

Thank You,

Paul

ps, How long will this sale be going on for?
 
Back
Top