Russell Bear
Well-Known Member
- Joined
- Aug 31, 2002
- Messages
- 1,703
Hi all, was cleaning up and found some parts you may be interested in. All for $50 shipped (US Only) Paypal, check, money order is fine.
Thanks…
(2) Hyperformance #8211 coupler (3/4 ID X 2)
Hyperformance #8210 coupler (5/8 ID X 2)
Aerotrend Ultra Blue coupler (3/4 ID X 4)
Octura Reinforced OC28HTEC coupler (7/8 ID X 3)
CMB 90 Exhaust Pipe Cutdown to 2-1/2 (with both o-rings)
New Speedmaster pipe mount (Small Hydro)
Dubro 2-56 Pull-Pull Cable set (#517)
Dumas Boats #7023 Boat Antenna
(3) OS in-flight needles 1 fine and 2 course
(3) K&B HP Glowplugs
40 size wedge hydro rudder with mount
60 size wedge hydro rudder with mount
40 size curved turn fin (sport 40)
Octura 3/16 round bottom strut and mount
Hydro Launch T-handle
(2) packs #PRND-5450 Dave Brown ¼ Aeroshaft pushrod end fittings
Dubro pushrod seals #3108
About half roll of the good 3M waterproof tape
Couple K&B curved water fittings
Futaba FSU2 fail safe
Hitec Mini servo HS-81MG
ABC H-38 (63.5 X 136.6) Dinged up some
Thanks…
(2) Hyperformance #8211 coupler (3/4 ID X 2)
Hyperformance #8210 coupler (5/8 ID X 2)
Aerotrend Ultra Blue coupler (3/4 ID X 4)
Octura Reinforced OC28HTEC coupler (7/8 ID X 3)
CMB 90 Exhaust Pipe Cutdown to 2-1/2 (with both o-rings)
New Speedmaster pipe mount (Small Hydro)
Dubro 2-56 Pull-Pull Cable set (#517)
Dumas Boats #7023 Boat Antenna
(3) OS in-flight needles 1 fine and 2 course
(3) K&B HP Glowplugs
40 size wedge hydro rudder with mount
60 size wedge hydro rudder with mount
40 size curved turn fin (sport 40)
Octura 3/16 round bottom strut and mount
Hydro Launch T-handle
(2) packs #PRND-5450 Dave Brown ¼ Aeroshaft pushrod end fittings
Dubro pushrod seals #3108
About half roll of the good 3M waterproof tape
Couple K&B curved water fittings
Futaba FSU2 fail safe
Hitec Mini servo HS-81MG
ABC H-38 (63.5 X 136.6) Dinged up some
Last edited by a moderator:
