MHardware fiberglass cowls

[Mike Hughes]

So there is quite a bit of interest in some of the cowl I can make. I will list them below. In order to try and keep track with all the PMs/threads, I will post all of the updates here.
G30 tunnel/JD design - 40
Shaman Inspired Full tunnel cowl - 40
Hotshot Sprint Cowl -35
Snake sp20 cowl / radio box - 45/15
MHardware Gas Rigger Cowl - 45
MHardware Gas Sport Cowl - 45
Anderson Gas Twin Cowl - 50
Eagle 21 straight - 35
Eagle 21 wrap - 35
Eagle 45 - 40
Eagle 67/80 - 40
Eagle 90 - 45
Eagle twin - 50
Eagle gas - 45

Prices above do not include shipping.

All the hydro cowls have larger flange edges. This will allow them to be used for other boats. You will just have to trim to fit. PM me for details on cowls to make sure they will fit you project.

There are a few others that are scale cowls. If you think you want some thing special, build a plug. I can pull a mold and you can have a glass part. I will try and post some pics at some point. I also have to order some more cardboard boxes. They wont arrive till April 1. So I can only ship a few more till then. You will notified for payment. If you receive that, that part is ready to ship. I dont take money before hand. Please be patient and I will get it done.
Thanks
Mike

21 Hydro Wrap and Straight Cowls


45 Hydro Cowl


MHardware Gas Rigger Cowl



Shaman Inspired Tunnel Cowl


G30 Tunnel Cowl


Anderson Gas Twin Cowl


MHardware Gas Sport Cowl

 

[Mike Hughes]

Mike Ball - 21 blem - paid and packing to ship
Howard Larson - 21 straight, 45 - mold drying with PVA
Frank Pulte - 21 straight, 21 wrap -
Samuel Hagan - 21 cowl - PM sent with question on type

 

[Hydro Junkie]

Mike, when you say scale, are you talking 1/6, 1/8 or 1/10?

 

[Mike Hughes]

Yes, very specific to what I have run in the past and near future. Not getting into that right now.

 

[Mike Hughes]

Mike Ball - 21 blem - shipped
Howard Larson - 21 straight, 45 - parts is in the mold drying
Frank Pulte - 21 straight, 21 wrap - 21 wrap part is in the mold drying
Samuel Hagan - 21 straight - waiting for a turn

 

[Howard Larson]

Mike,
While you have your molds out and warmed, how about 2- .21s?

 

[Mike Hughes]

Mike,
While you have your molds out and warmed, how about 2- .21s?

So you want another 21 straight? For a total of 2?

 

[Howard Larson]

Please good sir?

 

[Mike Hughes]

Howard Larson - 2x 21 straight, 45 - Last part in the mold drying, PM with payment details.
Frank Pulte - 21 straight, 21 wrap - 21 wrap done, waiting on mold to finish order
Samuel Hagan - 21 straight - waiting for a turn

 

[john v]

Mike, are cowls for the Ellison gas twin rigger something that you might be making in the future?

 

[Mike Hughes]

Not really. Dan is still around and producing parts. Dont want to step on his toes. I have a gas twin cowl that fits the boat Mark Anderson and I built. I can post pics.
Mike

 

[Shane Bastick]

Hi Mike
how much for one of your twin gas cowls ??

thanks

Shane

 

[Mike Hughes]

It would be 50.

 

[Mike Hughes]

New Update
Howard Larson - 2x 21 straight, 45 - Parts done, packed and ready to ship, waiting on MO that is in the mail
Frank Pulte - 21 straight, 21 wrap - Paid, dropping at the PO tomorrow
Samuel Hagan - 21 straight - Parts done, packed and ready to ship, waiting on paypal payment, PM with details

 

[john v]

Nice job Mike on that gas twin cowl

 

[john v]

Can you post some measurements for the twin gas cowls, I'm going to measure the boat and see if it works.
Thanks

 

[Mike Hughes]

Sure can John. I post it when I get home.
Mike

 

[Mike Hughes]

Sent pics in a PM to ya John.
Mike

 

[Mark Anderson]

Our twin is not the normal 10" tub. Cowl probably won't fit anything else out there.

 

[john v]

Got the pictures, will let you know how it looks