Darin Jordan
Well-Known Member
- Joined
- Mar 11, 2005
- Messages
- 1,821
Has anyone here run their ProBoat .18 motor without the head-shim installed?
I was measuring and it's .004", or about .1mm. ProBoat sells the .1mm, and the .2mm head shims for this motor. Is there anything to be gained here in a positive direction if I remove it completely? With the chamber still seal?
I was measuring and it's .004", or about .1mm. ProBoat sells the .1mm, and the .2mm head shims for this motor. Is there anything to be gained here in a positive direction if I remove it completely? With the chamber still seal?