Graham Humphrey
Member
- Joined
- Dec 6, 2012
- Messages
- 16
Price Drop!
45-Inch Full Throttle Racing Speedfreak Hydroplane
The Castle 2028, 780 kv motor with cooling can from OSE and Fightercat Racing 300 Amp ESC run great on 10S 2P. Oil lubrication system installed for flex shaft. Prather S-260 sharpened and balanced prop. Custom Carbon Fiber ESC mount. Speedmaster strut and turn fin. Speedmaster 5" dual inlet rudder (shortened). Also included is a brand new rudder ready to mount, or leave the modified rudder on. Custom aluminum motor mount by cocofonix. Custom triple layered Carbon Fiber mount brackets. 5" aluminum stuffing tube mount from Jan at Kintek Racing. Fully lined front to rear with Carbon Fiber/Kevlar. Bluebird BMS760dmg high torque metal gear digital servo. Carbon Fiber servo mount. Carbon Fiber steering rod guide tube. Jeff Wohltz 1/4" flex cable and teflon lined stuffing tube. Fightercat programming card and USB programming cable. All stainless steel hardware. Large diameter cooling tubes. Custom Monster Energy Carbon Fiber vinyl graphics. 3mm Carbon Fiber plate reinforced stern. Loaded for flotation with non expanding great stuff and fully tested in a pool.
I will also include a Thunder Power TP1430C 1-14 Cell LiPo DC 30A Charger with Balancer (bought new for $250.00 US), and two sets of batteries (2 x 10S and 4 x 5S).
Comes ARTR just add your radio system.
$999 U.S. Paypal only please.
Advise local pickup. Contact me to meet somewhere possibly.
45-Inch Full Throttle Racing Speedfreak Hydroplane
The Castle 2028, 780 kv motor with cooling can from OSE and Fightercat Racing 300 Amp ESC run great on 10S 2P. Oil lubrication system installed for flex shaft. Prather S-260 sharpened and balanced prop. Custom Carbon Fiber ESC mount. Speedmaster strut and turn fin. Speedmaster 5" dual inlet rudder (shortened). Also included is a brand new rudder ready to mount, or leave the modified rudder on. Custom aluminum motor mount by cocofonix. Custom triple layered Carbon Fiber mount brackets. 5" aluminum stuffing tube mount from Jan at Kintek Racing. Fully lined front to rear with Carbon Fiber/Kevlar. Bluebird BMS760dmg high torque metal gear digital servo. Carbon Fiber servo mount. Carbon Fiber steering rod guide tube. Jeff Wohltz 1/4" flex cable and teflon lined stuffing tube. Fightercat programming card and USB programming cable. All stainless steel hardware. Large diameter cooling tubes. Custom Monster Energy Carbon Fiber vinyl graphics. 3mm Carbon Fiber plate reinforced stern. Loaded for flotation with non expanding great stuff and fully tested in a pool.
I will also include a Thunder Power TP1430C 1-14 Cell LiPo DC 30A Charger with Balancer (bought new for $250.00 US), and two sets of batteries (2 x 10S and 4 x 5S).
Comes ARTR just add your radio system.
$999 U.S. Paypal only please.
Advise local pickup. Contact me to meet somewhere possibly.
Last edited by a moderator:
