Darren Elson
Well-Known Member
- Joined
- Mar 7, 2010
- Messages
- 441
After designing and building the 38" Xcat for either nitro or eleccy and proving to run and handle with solid performance i thought id build a bigger brother to it for gas
This is the original 38" version
Hopefully this will perform the same and prove to be a fast,stable design,iv smoothed out some of the lines for more sleak look,just starting on the hatch hoping to have it finished soon![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Pic of rough setup,will be powered by Se engine and enough room for exhaust and fuel bag in the sponson
This is the original 38" version
![DSC02224.jpg](https://proxy.imagearchive.com/448/44865b4ba58c4af88636b4e48d4975fd.jpg)
Hopefully this will perform the same and prove to be a fast,stable design,iv smoothed out some of the lines for more sleak look,just starting on the hatch hoping to have it finished soon
![DSC02472.jpg](https://proxy.imagearchive.com/5f4/5f4e4e5ba959444e03623bd634256350.jpg)
![DSC02471.jpg](https://proxy.imagearchive.com/46d/46d0a3367b85829cbb656d553bd97ce9.jpg)
![DSC02469.jpg](https://proxy.imagearchive.com/115/115bac7edac59f0f11e02eaf3c0714e9.jpg)
![DSC02468.jpg](https://proxy.imagearchive.com/d23/d23da5af94b19f652572d5a64590dd9e.jpg)
![DSC02470.jpg](https://proxy.imagearchive.com/ce1/ce11124f16c10a986a36bc505fa2555a.jpg)
![DSC02473.jpg](https://proxy.imagearchive.com/2b7/2b7e80f97aa2e0348788264c9f13ada4.jpg)
Pic of rough setup,will be powered by Se engine and enough room for exhaust and fuel bag in the sponson
![DSC02447.jpg](https://proxy.imagearchive.com/208/208a5926ce19b73eed675b4521ca2bc3.jpg)