.21 Tunnels, Powerheads

[Slideblues]

Hey Gang,

Tossing around the idea of doing a 21 mod hull too,

Just in tha planing stages so far.

So what are your fav's?

Gene

HTB 290

Lynx

Cobra

Vision 20

TS3

Woodstuff

LeeCraft

Other....

 

[John Knight]

Hey Gang,

Tossing around the idea of doing a 21 mod hull too,

Just in tha planing stages so far.

So what are your fav's?

Gene

HTB 290

Lynx

Cobra

Vision 20

TS3

Woodstuff

LeeCraft

Other....

Vision for me.

 

[Mark Leyde]

I am liking the way that my Vision is working for me.

If you like to build. I also think a NS295 would also be a good hull. Whish I had time to build my son's and have him test it this year yet. But I have way to many projects going on right now.

 

[Luca Gray]

Vision

here you go



cheers Luca

 

[bob miller]

I am liking the way that my Vision is working for me.

If you like to build. I also think a NS295 would also be a good hull. Whish I had time to build my son's and have him test it this year yet. But I have way to many projects going on right now.

lights , what is a " ns295 " ....thanks.....bob

 

[Mark Leyde]

I am liking the way that my Vision is working for me.

If you like to build. I also think a NS295 would also be a good hull. Whish I had time to build my son's and have him test it this year yet. But I have way to many projects going on right now.

lights , what is a " ns295 " ....thanks.....bob

Check out this thread to find out more about the PS295 (electric) and the NS295(Nitro) http://www.intlwaters.com/index.php?showtopic=44813&st=0&p=403007&hl=ps295&fromsearch=1entry403007

 

[Slideblues]

Hey Guy's

Yea I saw Aarons run, Smokin to say tha least....

Well done on tha Kit!

Like the shape and cowl.

Thanks for the info,

Gene

 

[Slideblues]

While I was shaping the stumble blocks, Added a half moon groove down tha middle.

This might free up the hull sooner, transition WOT after apex,

Gene

 

[Slideblues]

Prop question,

Is anybody running a 1440, cupped and cut from back a few?

Just wondering,

Anderson, AB, Sholund, All had versions of it...

Gene

 

[ozbryan]

Gene I like a 40x53 with a bit of cut back on it on my vs1/OS.

Off the top of my head I think Tim Duggan is still playing with the 1440s... His boat is very quick!

 

[Tim_Duggan]

Thanks Bryan.

I didn't like the 1440's habits much for heat racing. It's fast, but heat times weren't there for me.

GR 40x53 in various modified forms are what I like on the OS. Nice prop and can get the OS in that sweet spot.

 

[Slideblues]

Hey Bryan and Tim,

Yea the 1440 on a lite rigged hull was different, throttle on/off drama,

But when it hooked up, Went like stink!

Gene

I gotta look up my old prop notes and see just what I used to run,

Seems like there was a X640 heavy mods too....

The X437/3 that I have and a 40x53 should do fer starts.

 

[Slideblues]

Hey Greg,

Thats what I was try'n to remember.....

38mm and barr cut

Thanks Man,

Gene

 

[Tim_Duggan]

Hey Bryan and Tim,

Thanks for the reply's

Yea the 1440 on a lite rigged hull was different, throttle on/off drama,

But when it hooked up, Went like stink!

Gene

I gotta look up my old prop notes and see just what I used to run,

Seems like there was a X640 heavy mods too....

The X437/3 that I have and a 40x53 should do fer starts.

Gener,

You'll quickly realise the OS is very different in terms of prop and set-up to the K&B's you used to run. I guess it comes down to what you want to do. If you want to heat race it, it will more than likely require a different approach to just going fast in a straight line.

Given your motor is far from the normal OS and Gabe gave you the gun prop for that engine, I'd say work with that to form a baseline. Then work on stuff like your pin inclination and CG to get the boat balanced and cornering nicely.

 

[Slideblues]

Hey Timbo,

Yea variations on the theme, Learning curve fer sure!

Same hull yet K-B 3.5, Nova/K-B foot, CMB/Lawless, and now OSXM

I got cha Mate

Thanks,

Back ta make'n sawdust.....

Lata,

Gene

Pics uploaded to gallery,

Check my album for updates.....