John Beardslee's latest activity

Brandon, check your collet to see what the run out is and also check the prop to see if it’***** something and slightly changed the...

Rodney, I think Al is on his way there and might be off the grid for awhile but will probably be back on line later today. John

Send them out and have them digitized to a DVD. I did some family 8mm film and will send VHS tapes out when we get back north, well...

Tom, I think the last I purchased after AcuSeal went out of business was from Mr. Ralph at RR. John

I pump Corrosion X through all water jackets as part of my after run. You can use WD40 but you will need to flush it out after with...

John wasn’t interested in model boaters in the beginning, he was very content to sell cheap motors to airplane guys. As more and more...

I wouldn’t use micro balloons, they reduce strength. Use micro fiber only for strength but you can use micro balloons for final...

I’d use masking tape to build a dam all around it. Then use straight West epoxy, warm it with a hot air gun and use halogen lights to...

I’ve also heard that if you dig deep enough at Boca Bearing you can get the good nova bearings.

Tim Did you check with Al Hobbs? He’s carrying WIB for his engines and from the thread conversation on here they may be common. John

Marvel Mystery Oil and ATF have similar viscosity. ATF is quite thin as far as lubricants are concerned. It will find its way into the...

Jim Wilson introduced us both to it at Hobart many years ago. If you knew him then you know the amount of research and testing he did...

If you’re one of those that like to spray their after run through the spray bar in the carb the Rislone will work better if thinned. A...

I don’t use this stuff as an anything and everything spray. I use it only to water proof electronics. If I remember there were videos...

You might check with Alan Elzer (sp) Bam Racing on here. I think he made some awhile back.